|
Author
|
Topic: 393 cleveland back 10.82 124.18 mph
|
jim1320
Gearhead Posts: 224
From: white plains, maryland, usa
Registered: Apr 2003
|
posted 11-16-2003 03:38 PM
   
I went to track today we got rain out but 3 run all in the 80,S 1 st run 1.51 60 ft 10.82 124.18, 2nd 1.52 60 ft 10.85 123.45,3 rd 1.52 ft 10.86 123.38 shifting 6600 rpm ahd going thur about 7100 rpm going play with plugs and carb. jetting. jim1320 3550 lbs mach1 with 3 inch exhaust------------------
1970 Mach 1 393 stroker cleveland best 10.82 @124.50 3550 lb car with exhaust have fun!!! [This message has been edited by jim1320 (edited 11-16-2003).] [This message has been edited by jim1320 (edited 11-16-2003).]
IP: Logged |
Fastymz
Moderator Posts: 20708
From: Reno Nv USA M&M#1240
Registered: Apr 2001
|
posted 11-16-2003 03:48 PM
Great times Jim  ------------------
SCOOP 2.26 60'S
14.9 @ 90.86MPH 65 coupe,351w,C4,Big Boss 429 hood scoop,8" 3.40 TracLoc. My Pics
IP: Logged |
XR7
Gearhead Posts: 148
From: north Idaho
Registered: Mar 2003
|
posted 11-16-2003 06:32 PM
Those are good runs! I don't know your car and was wondering how your rear suspension was set up. I am running 124mph but my 60 ft and ET are slower because I'm not hooking. Can you give me the rundown on your setup? Thanks
IP: Logged |
Buster
Gearhead Posts: 1553
From: Hurricane alley
Registered: May 2002
|
posted 11-16-2003 06:36 PM
OK Jim, time to change your sig again =)
IP: Logged |
Mustangsandmore Forums
