|
Author
|
Topic: Mustang axles
|
NM Dave
Journeyman Posts: 52
From: Santa Fe, NM USA
Registered: Jul 2003
|
posted 11-14-2003 07:44 PM
 
I am about to order up some axles for my 89 mustang with a 8.8 rear and Moser need to know the following info.Wheel to Wheel Width (inches)
Housing flange to housing flange (inches)
Driver side housing flange to pinion center (inches)
Passenger side housing flange to pinion center Thanks Much Dave
|
steve'66
Gearhead Posts: 9835
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 11-14-2003 09:04 PM
Dave,Can't you measure yours? Or just tell them it's stock?  SteveW
|
afret
Gearhead Posts: 243
From: Lancaster, CA
Registered: Feb 2003
|
posted 11-14-2003 09:41 PM
Steve66 has a good point. When I got axles from them recently for my 69, they had all the specs in their database already for a stock setup. I would think they would have the needed info for your setup if it is stock length since I'm sure they sell a lot for the Fox Mustang.
|
steve'66
Gearhead Posts: 9835
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 11-15-2003 01:19 AM
Dave,Where do you race in NM? I was born in Roswell, and have been going back the last 5 years to hunt. I didn't notice any dragstrips on my trips. Where do you hide the race tracks? I did see a good bumper sticker in NM though. It said "racing" baseball, football, tennis, soccer, racketball, only need one ball.  SteveW
|
NM Dave
Journeyman Posts: 52
From: Santa Fe, NM USA
Registered: Jul 2003
|
posted 11-15-2003 06:41 PM
There is a track in Roswell itself, If you lose the first round the aliens take you away. There are about three tracks here. Roswell, ABQ and there is another one that escapes me at this time. The car I am building will be mostly raced out of state at divisional and some national NHRA events. it is going to be a G/FI and H/FI stocker. I do alot of hunting here too, antelope, turkey, elk and birds. I picked up a bare 8.8 rear end so the axles are not there to be present. I was going to just order them online and the form requires that info. I guess I will just call them on monday
|
steve'66
Gearhead Posts: 9835
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 11-16-2003 12:37 AM
Dave,I was born 4 years after the aliens supposably landed in Roswell.  SteveW
|
Fastback68
Gearhead Posts: 4511
From: Sucat, Paranaque, Philippines
Registered: Jul 99
|
posted 11-16-2003 09:23 AM
I was exactly three months and one day old when the KC-97 accident occurred at Roswell, June 26, 1956.
I'm drunk - I really shouldn't be writing this
|
NM Dave
Journeyman Posts: 52
From: Santa Fe, NM USA
Registered: Jul 2003
|
posted 11-16-2003 02:47 PM
Steve are you sure you were not bronught by the aliens and just kept in suspended animation?[This message has been edited by NM Dave (edited 11-16-2003).]
|
Strain Gang
Gearhead Posts: 250
From: Thor, Iowa
Registered: Mar 2003
|
posted 11-16-2003 04:27 PM
I have Moser axles in our 8.8 in our Stang and just ordered them out of Jegs. I dont understand why they need all the measurements. They are just stock length, correct? Steve.
|
steve'66
Gearhead Posts: 9835
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 11-17-2003 12:16 AM
quote:
Originally posted by NM Dave:
Steve are you sure you were not bronught by the aliens and just kept in suspended animation?[This message has been edited by NM Dave (edited 11-16-2003).]
NOPE SteveW
|
