Flexplate change for 289-351 swap - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

Flexplate change for 289-351 swap

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Flexplate change for 289-351 swap
mainer Gearhead Posts: 157 From: Bryant Pond, Maine Registered: Sep 2003	posted 10-13-2003 03:09 PM I believe my car has a 157 tooth flexplate. Will it work for the new 351 stroker that's going in? If not, what do I need to know/ask to get the right one? Also, anyone used a canton pan in a 67/68 mustang? If so, was it this part #15-660 FORD 302/351W Canton Street Pan? thanks, don ------------------ 68 Mustang Coupe IP: Logged
N266fords Gearhead Posts: 1652 From: Sierra Vista ,Az USA Registered: Apr 2003	posted 10-13-2003 09:01 PM if you are going to use the same transmission that you are using for the 289 yes it will work. they are both 28.2 oz balanced.. Bruce IP: Logged
steve'66 Gearhead Posts: 9489 From: Sonoma,CA,USA Registered: Mar 2000	posted 10-13-2003 10:51 PM Yep It'll work fine on the stroker, the size of the flexplate depends on the bellhousing/ tranny you put behind it. Like Bruce said, SteveW IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]