|
Author
|
Topic: intake identification
|
capri man
Gearhead Posts: 6652
From: doerun, ga.
Registered: Nov 2000
|
posted 08-31-2003 03:30 PM
   
i have a motorsports single plane intake with 9424-D302 cast on the runner next to the right rear of the carb. anyone know any info on this intake or where i could find any? frpp's site dont have a clue!! thanks------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html [This message has been edited by capri man (edited 08-31-2003).]
IP: Logged |
Daniel Jones
Gearhead Posts: 828
From: St. Louis, MO
Registered: Aug 99
|
posted 08-31-2003 05:53 PM
Should be a Motorsport part numbered Victor Jr. for a SBF.Dan Jones
IP: Logged |
capri man
Gearhead Posts: 6652
From: doerun, ga.
Registered: Nov 2000
|
posted 09-01-2003 10:08 AM
i have a stumble when i launch. i have tried all the carb adjustment stuff. actually i have had 4 carbs on it. had the timing all over the place. had the valves all over the place etc. this intake is rated from 3500-8000 rpm. i am leaving at approx 1700 rpm. (all i can hold it) think the intake/leaving rpm combo could be the problem?? yes i know i need to get rid of the power brakes. it leaves ok at about 1/2 throttle, its just when you put it on the floor that it stumbles. i even tried my 500 cfm 2bbl and it still does it. what you experts think? i have give out if ideas.------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html
IP: Logged |
Mustangsandmore Forums
