C6 Shifter - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

Ford Racing

C6 Shifter

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: C6 Shifter
HHStang Gearhead Posts: 596 From: Coastal SC, USA Registered: Feb 2003	posted 08-14-2003 09:12 PM Is there such a thing as a shifter that doesn't use a cable for a reverse pattern/manual c6? I keep trashing cables on my b&m shifter.
kid vishus Gearhead Posts: 7251 From: middle of NC Registered: Oct 2000	posted 08-14-2003 09:22 PM Is it too close to the hedders? I have never had any problems with any of the cables I have used. No cable troubles even when I ran a C6.
HHStang Gearhead Posts: 596 From: Coastal SC, USA Registered: Feb 2003	posted 08-15-2003 09:08 PM Yes. I keep rerouting it, I've even put a heat shield and it keeps overheating and exploding. I have 429 in a 1967 and it just seems to get too hot. I put a new cable in yesterday and am hoping the new route works.
clevelandstyle Gearhead Posts: 1558 From: central Indiana Registered: Jul 2001	posted 08-16-2003 12:03 AM Are you using the heavy duty cable or the cheap cable? Big difference! ------------------ Ben Grabber Green '70 Mach I 351C 4V Robbin Egg Blue '79 Fairmont 351C 4V
HHStang Gearhead Posts: 596 From: Coastal SC, USA Registered: Feb 2003	posted 08-16-2003 07:49 AM I've melted down both. It doesn't seem to make a difference.

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]