|
Author
|
Topic: Which roller rockers?
|
Stang72
Gearhead Posts: 283
From: Arkel,Zuid-Holland,Holland
Registered: Jan 2003
|
posted 07-29-2003 04:35 PM
   
I'm gonna put on some roller rocker on my 302. only i can't decide on the brand, Harland sharp or crane cams, both are aluminium. Do you guys have experience with these 2 brands???heads are Windsor JR and Cam is FMS A312, 472/496 lift greetz Ben
IP: Logged |
Tea'sGrabber
Gearhead Posts: 276
From: Seattle, Wash.
Registered: Feb 2003
|
posted 07-29-2003 04:41 PM
I'm partial ti Crane.... I use the Gold race rockers.... Never had a problem.. ------------------
Todd 71 Mav Grabber All orig 306 cu.in. Cast Iron heads. Carillo Rods.Best et. 10.71 @ 124 thru the mufflers.
IP: Logged |
capri man
Gearhead Posts: 7249
From: doerun, ga.
Registered: Nov 2000
|
posted 07-29-2003 07:54 PM
both of those are good, just sray away from pro-form!!!------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
steve'66
Gearhead Posts: 9489
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-29-2003 10:15 PM
I'm using HarlandSharp on the 408w and Crane Gold in the "other" car. Both are fine, the nod would probably go to the Crane Golds. But haven't had a problem with either one.  SteveW
IP: Logged |
kid vishus
Gearhead Posts: 6405
From: middle of NC
Registered: Oct 2000
|
posted 07-29-2003 10:31 PM
Crower stainless. Oh wait, that wasn't one of the choices. 
IP: Logged |
Stang72
Gearhead Posts: 283
From: Arkel,Zuid-Holland,Holland
Registered: Jan 2003
|
posted 07-30-2003 12:13 PM
Ok , thanx for the replies.but it will be the Crane energizer one's not the Gold series... i don't have the gold money for it and it's not an racing engine, so it'll work fine then i guess with the energizer one's anyway thx for the advice
IP: Logged |
Mustangsandmore Forums
