can somebody................ - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

can somebody................

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: can somebody................
BLUE Journeyman Posts: 93 From: COLLINSVILLE, IL Registered: May 2002	posted 07-27-2003 08:45 PM tell me what kind of grease i can use with polyurethane bushings (control arms)? IP: Logged
bigblocked85 Journeyman Posts: 41 From: Waterford,MI Registered: May 2003	posted 07-27-2003 09:21 PM I use regular bearing grease. I typically will drill and tap for a zerk fitting in areas that will need to be lubed. Gotta hate those poly squeeks! IP: Logged
BLUE Journeyman Posts: 93 From: COLLINSVILLE, IL Registered: May 2002	posted 07-27-2003 09:24 PM thanks bigblocked the fittings are already on the control arms, just didnt know if regular grease had a detrimental effect on the polyurethane bushings. thanks again Jeff IP: Logged
steve'66 Gearhead Posts: 6522 From: Sonoma,CA,USA Registered: Mar 2000	posted 07-27-2003 10:37 PM If you drive it on wet roads you might try waterproof wheel bearing grease for boat trailers. It won't wash out as quickly. SteveW IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]
[ Mustangsandmore.com Bookstore] [Mustangsandmore.com T-Shirts][Tech Articles]