|
Author
|
Topic: Computer question?
|
RPM289
Gearhead Posts: 140
From: Phenix City, AL
Registered: Feb 2002
|
posted 07-14-2003 09:51 PM
   
I have a 93 t-bird 5.0HO engine I am going to install in my 66 Mustang and I want to install a 5 speed instead of the AOD. Will a Mustang 5 speed computer will work with the bird engine harness? Or did they make a 5 speed v8 bird I can't recall ever seeing one. Thanks, ------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
67coupe
Gearhead Posts: 490
From: dallas NC usa
Registered: Nov 2000
|
posted 07-14-2003 10:16 PM
im not sure bout the tbird to stang but i do know u need to change a few pins to convert to a manual comp from auto do u know the model of the comp u have and is it an aod or aode if its just an aod no need to change comp it will work just fine aod is a mechanical trans no electronics so good luck  ------------------
Josh
67 coupe with 351c
8.41 in the 1/8
1.90 60'
at 82.03 mph
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5
IP: Logged |
RPM289
Gearhead Posts: 140
From: Phenix City, AL
Registered: Feb 2002
|
posted 07-15-2003 11:59 AM
quote:
Originally posted by 67coupe:
im not sure bout the tbird to stang but i do know u need to change a few pins to convert to a manual comp from auto do u know the model of the comp u have and is it an aod or aode if its just an aod no need to change comp it will work just fine aod is a mechanical trans no electronics so good luck
It is out of a 93 bird with a AOD. I guess I will try it and see how well it works. ------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
Mustangsandmore Forums
