|
Author
|
Topic: AOD snap ring lost or not????????
|
393Clevor
Journeyman Posts: 24
From: pittsfield, NH
Registered: Jul 2003
|
posted 07-13-2003 10:03 AM
  
I took apart an 1988 AOD a year ago and I finally got it back together (well almost) the other day. I��m at the very end of the build were I��m putting the front pump back on. When you put the large clutches in the case you start with the pressure plate and then the steels and clutches and when you have the last steel in it looks like there is a snap ring that should hold the clutch pack in the case. There is a grove cut into the case at the very end that looks like a snap ring should go but I don��t have it and all the pics and manuals I have do not show one. Lets back up a minute, you take the front pump off and is there a snap ring there that holds the clutch pack into the case.I just did a 1995 F250 at work that needed a front pump and converter and that one has a snap ring in it that holds the clutches in place so it got me thinking that I��m missing it. I no the tranys are not the same but the grove that��s cut into the cases look alike. Thanks any input would be greatly appreciated.
IP: Logged |
Tbird
Gearhead Posts: 145
From: USA
Registered: May 2003
|
posted 07-14-2003 10:09 AM
See if this page might help any.http://www.acerecon.com/catalog/automatics/illustration.asp?t=36&i=4855
IP: Logged |
393Clevor
Journeyman Posts: 24
From: pittsfield, NH
Registered: Jul 2003
|
posted 07-14-2003 10:33 AM
Thanks
It looks like there is no snap ring in that pic as well. I might be ok. I just picked up another AOD I'll take it apart and see if it has one. Again Thanks Steve.....
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
