|
Author
|
Topic: Camshaft help
|
chevy enemy
Gearhead Posts: 345
From: Milton-Freewater, Oregon
Registered: Jan 2001
|
posted 07-11-2003 12:55 AM
   
What cam would you recommend for my 5.0
bored .030 over, ported factory heads. performer 289 intake, 5-speed, 3.50 trac loc. 670 street avenger carb. I am looking at a Comp cams catalog they don`t have anything less than 500 lift and i was told by my uncle that anything that had much over 220 duration would be to much for my setup. your opinions please
IP: Logged |
Kellxr7
Gearhead Posts: 129
From: Medstead SK Canada
Registered: Mar 2003
|
posted 07-11-2003 10:14 AM
I have nearly the same setup as you and I am running a Trickflow TFS-51402000, It is their mildest cam, I am using the stock valvesprings and havent had any trouble over the past 8000 miles, The cam has a good idle and has good low & very good midrange power, Plus its cheaper than a comp cam, just my 2C, oh go to www.trickflow.com if you want more specs on that cam. Good luck, Kel[This message has been edited by Kellxr7 (edited 07-11-2003).]
IP: Logged |
10sec80cobra
Journeyman Posts: 2
From: mechanicsville,md
Registered: Jul 2003
|
posted 07-11-2003 05:24 PM
i would give cam research a call and see what they have.they grind only ford cams. have a cam research cam in my 10sec n/a 306 www.camresearchcorp.com 303-762-022
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
