Crankshaft help/info - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

Ford Racing

Crankshaft help/info

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Crankshaft help/info
N266fords Gearhead Posts: 1662 From: Sierra Vista ,Az USA Registered: Apr 2003	posted 07-08-2003 01:36 AM I have a forged crank that is a scat 3.85 stroke and no parting line anywhere.? What gives.Am I stupid or am i just no getting something? My 69 351w crank is cast in my old one and the line is thin about 1/16 like it should be for cast and forged have a 1/4 inch parting line usually right?Please help as im lost the number on the crank reads 23894.7 if that helps any..Bruce thanks in advance
Tbird Gearhead Posts: 298 From: USA Registered: May 2003	posted 07-08-2003 12:24 PM A billet crank has no forging lines. Sounds like you have a billet insted of forged crank on your hands.
N266fords Gearhead Posts: 1662 From: Sierra Vista ,Az USA Registered: Apr 2003	posted 07-08-2003 12:56 PM thats what i thought man did i get a killer deal..Its a 393 kit w/forged 4340 rods floating pins JE pistons custom 10.5 w/60 cc heads sfi flex plate 157th and sfi balance clevitte 77 h bearings and balance job 2,285..I am so happy happy happy..Bruce

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]