|
Author
|
Topic: 5.0 Swap?
|
RPM289
Gearhead Posts: 112
From: Phenix City, AL
Registered: Feb 2002
|
posted 07-01-2003 11:55 AM
   
I found a 91 t-bird with a 5.0 HO, AOD hedders etc. Is this the same as the Mustang 5.0? I may be putting it into my 66 and can get the computer, wiring harness,trans, basicly anything I want from the running gears. I know I need all of the underhood wiring and the main harness going to the computer. What else will I need from the inside wiring harness etc? I have never done a swap like this so all information will be greatly appreciated. ------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
Tbird
Gearhead Posts: 145
From: USA
Registered: May 2003
|
posted 07-01-2003 01:01 PM
Send Ford $5 for the instructions shown for their main harness...http://www.oemfordparts.com/PartDetail.asp?S=1&PartID=725&SubCategoryID=30 [This message has been edited by Tbird (edited 07-01-2003).]
IP: Logged |
CJR
Journeyman Posts: 39
From: Mt. Olive NC
Registered: May 2002
|
posted 07-01-2003 03:42 PM
The best thing you could do is bring the 66 and T-bird stuff north!!! Sounds like you are getting ready to have the pony back on the road.
IP: Logged |
RPM289
Gearhead Posts: 112
From: Phenix City, AL
Registered: Feb 2002
|
posted 07-02-2003 12:46 PM
quote:
Originally posted by Tbird:
Send Ford $5 for the instructions shown for their main harness...http://www.oemfordparts.com/PartDetail.asp?S=1&PartID=725&SubCategoryID=30 Thanks for the link I will order the instructions today.
[This message has been edited by Tbird (edited 07-01-2003).]
------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
