|
Author
|
Topic: 302 roller conversion
|
wunaberacer
Journeyman Posts: 4
From: la, ca, usa
Registered: Jun 2003
|
posted 06-29-2003 10:40 PM
   
any idea of what need to be done to my old 302 to get er rolling? sites with the info and pics? thanks
IP: Logged |
wunaberacer
Journeyman Posts: 4
From: la, ca, usa
Registered: Jun 2003
|
posted 06-29-2003 10:44 PM
i need to know how to make it a roller block, from previous hyd.
IP: Logged |
steve'66
Gearhead Posts: 9489
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-29-2003 11:30 PM
CompCams has what you want,http://www.compcams.com/catalog/139.html SteveW
IP: Logged |
steve'66
Gearhead Posts: 9489
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-29-2003 11:31 PM
AND,Welcome to M&M!!  SteveW
IP: Logged |
N266fords
Gearhead Posts: 1652
From: Sierra Vista ,Az USA
Registered: Apr 2003
|
posted 06-29-2003 11:34 PM
http://www.trueblueford.com/66'XRfalconEFI351wconversionP3.html here is one. I have done this and i used the retro roller cam (comp &crane offer this ) but you can use a 5.0 roller cam anyone you want if you use the roller lifters that have the link bar on top..Other wise you have to use the spyder assembly and dog bones from a 5.0 and a small base circle cam decribed above.Also you have to drill and tap 2 1/4-20 holes for the spyder assm. with the rollers that have a top link bar there is no machine work at all..Bruce
IP: Logged |
wunaberacer
Journeyman Posts: 4
From: la, ca, usa
Registered: Jun 2003
|
posted 06-30-2003 01:01 AM
okie kool thanx fellers
IP: Logged |
Mustangsandmore Forums
