|
Author
|
Topic: Measuring flexplate?
|
thumpin cat
Gearhead Posts: 458
From: Santa Barbara, California
Registered: Mar 2002
|
posted 06-24-2003 09:48 PM
  
Do you measure the flexplate by measuring from the middle of the bolt hole across to the middle of the opposing bolt hole?please let me know thanks.
IP: Logged |
Bluegras
Journeyman Posts: 64
From: Easton,Pa.
Registered: Nov 2001
|
posted 06-24-2003 10:16 PM
You could do it that way but most of the time the flex plate is specified by the number of teeth on the ring gear. 157 being small, 164 being for most applications.
IP: Logged |
Dave_C
Gearhead Posts: 968
From: Gadsden, Al
Registered: Aug 99
|
posted 06-24-2003 11:53 PM
The converter bolt holes on the 157 tooth flexplate will be on a 10 1/2" bolt circle. This is for a small bell C-4.The converter bolt holes on a 164 tooth flexplate will be on a 11 7/16" bolt circle. This size is for a large bell C-4, FMX, AOD or small block C-6. Later,
David Cole [This message has been edited by Dave_C (edited 06-24-2003).]
IP: Logged |
Mustangsandmore Forums
