|
Author
|
Topic: Victor Jr. head question
|
thumpin cat
Gearhead Posts: 458
From: Santa Barbara, California
Registered: Mar 2002
|
posted 06-20-2003 04:05 PM
  
Does anyone know what type, size, heat requiremnt, and gap spark plugs victor jr heads require? please let me know thanks edelbrock never answers their phones! so i cant ask them.
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-20-2003 04:11 PM
Autolite 3924, or if you want a little colder Autolite 3923.
If you want racing plugs, try Autolite AR3923.Just going by memory though,  SteveW [This message has been edited by steve'66 (edited 06-20-2003).]
IP: Logged |
thumpin cat
Gearhead Posts: 458
From: Santa Barbara, California
Registered: Mar 2002
|
posted 06-20-2003 04:15 PM
thanks steve
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-20-2003 04:17 PM
You're welcome T/C, I'll double check tonight after I get home. But I'm pretty sure those numbers are right. SteveW
IP: Logged |
thumpin cat
Gearhead Posts: 458
From: Santa Barbara, California
Registered: Mar 2002
|
posted 06-20-2003 04:25 PM
Where can i purchase these plugs, i looked on the net but i could not find them?which plugs are you running on the 66?
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-20-2003 04:54 PM
I just use the Autolite 3923 copper plugs. You can get them at Kragen/Chucker/Schucks, PepBoys or whatever chain you have near you. The AR3923 usually have to be ordered. Alex stocks them,SteveW
IP: Logged |
Mustangsandmore Forums
