|
Author
|
Topic: Spark Plug question?
|
thumpin cat
Gearhead Posts: 458
From: Santa Barbara, California
Registered: Mar 2002
|
posted 06-20-2003 03:31 AM
  
Which spark plugs are the best to use with Edelbrock Victor jr. heads on a 351w?If you can please give me part numbers thanks please let me know thanks.
IP: Logged |
Tbird
Gearhead Posts: 298
From: USA
Registered: May 2003
|
posted 06-20-2003 08:22 AM
Since I am unaware of the type plug you actually need for your heads, gasket or taper or length and without knowing a lot about your combo, I would suggest starting out with something like a Motorcraft in the 32 heat range. This would be like an AF32 or BF32 or even the AGS style. The 2 in the 32 is with a projected tip.[This message has been edited by Tbird (edited 06-20-2003).]
IP: Logged |
Toronado3800
Gearhead Posts: 851
From: St. Louis, MO
Registered: Jul 2001
|
posted 06-21-2003 06:46 PM
Tbird has much more detailed expertise than myself. I was just going to say I don't like all them pricey multi tipped pluggs. I'm too cheap to keep changing them and always figure after three or four revolutions one tip will be a little different than the other and the spark won't jump as designed.
IP: Logged |
Mustangsandmore Forums
