|
Author
|
Topic: 351C piston clearance specs.
|
timjk
Journeyman Posts: 55
From:
Registered: Oct 2001
|
posted 06-17-2003 08:43 PM
   
I can't seem to locate piston to cyl. clearance specs. for Speed Pro H555P in a 351C. Can anyone help me?Thanks,
Tim
IP: Logged |
V8 Thumper
Gearhead Posts: 3467
From: Orange, Ca. United States of America
Registered: Dec 2001
|
posted 06-17-2003 08:59 PM
I'd contact Speed Pro directly  ------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
ironbullet
Journeyman Posts: 32
From: wytheville va usa
Registered: May 2003
|
posted 06-20-2003 01:07 PM
my speed pro cat says .0010 .
IP: Logged |
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 06-21-2003 09:12 AM
quote:
Originally posted by ironbullet:
my speed pro cat says .0010 .
.001?
That's super tight.
I would have thought .003 to .005
IP: Logged |
ironbullet
Journeyman Posts: 32
From: wytheville va usa
Registered: May 2003
|
posted 06-21-2003 04:33 PM
thats what it says ,I looked twice .Its a hyper piston BTW.
IP: Logged |
Greg Pettit
Journeyman Posts: 75
From: Dallas, TX
Registered: Nov 2001
|
posted 06-21-2003 05:21 PM
The H535CP's in my 460 said .0015 min clearance, and that is a 4.390" piston!!Speed pro does not list a maximum number, however. Greg
IP: Logged |
ironbullet
Journeyman Posts: 32
From: wytheville va usa
Registered: May 2003
|
posted 06-22-2003 10:55 AM
thats right they do list bigger clearances for bigger bores , which makes sense, but for bores around 4" they list .001, for all makes with hyper. It is unusual for them not too list a range such as .001-.002 , I would be worried myself . Sadly I don't believe you'll be able to get anyone on the horn to adress your q's cause its such a big corporation.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
