What can u tell me about a edelbrock 351w streetmaster manifold? - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

What can u tell me about a edelbrock 351w streetmaster manifold?

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: What can u tell me about a edelbrock 351w streetmaster manifold?
stinger Gearhead Posts: 160 From: mn Registered: Feb 2003	posted 06-11-2003 04:11 PM Thanks in advance. IP: Logged
N266fords Gearhead Posts: 373 From: Spokane ,WA USA Registered: Apr 2003	posted 06-11-2003 05:04 PM It an old restrictive manifold if my memory serves me right. I believe it a dual plemunin and very flat ( no rise ) .Bruce IP: Logged
ukracer Journeyman Posts: 38 From: South Wales UK Registered: Apr 2003	posted 06-11-2003 05:04 PM Well, I am not sure about the 351 version but I had one for my 460 many years ago and the ports were so small (like arrow slits) that I could barely get my smallest finger in one! Granted I do have large fingers but nonetheless, these ports were very small even compared to the stock iron intake. In track testing (drags) it ran the same as the stock intake so I sold it on. I am pretty sure the 351 streetmaster will be similar idea, with small port cross-section coupled with a small plenum to keep response sharp with it's single-plane design. I would never use one now, and have a Performer RPM on my 351W currently and it's staying! HTH Cheers, Martin. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Links] [Members' Pics] [Tech] [ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]