|
Author
|
Topic: electric water pump drive motor
|
capri man
Gearhead Posts: 3385
From: doerun, ga.
Registered: Nov 2000
|
posted 06-04-2003 11:29 AM
   
i try to keep a spare motor at all times. i know a heater blower motor from a 1971 mustang will work. i read somewhere about one from a ford truck was heavier and ran a little faster. does anyone know what year/model to ask for? thanks------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
Rory McNeil
Gearhead Posts: 1210
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 06-04-2003 11:51 AM
I asked for a fan motor from a 1974 Ford pickup, however, when I bought another fan motor for my 78 Fairmont, it looked identical. Both work fine, and look exactly the same as the motor that came with my Moroso WP drive kit.------------------
78 Fairmont 428 4 speed 10.20@130mph
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA Stocker 302 5speed. soon to be under the index!
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
IP: Logged |
Ryan Wilke
Gearhead Posts: 1501
From: Stanton, Michigan 49707
Registered: Oct 2000
|
posted 06-04-2003 01:04 PM
Mike/Rory:
On another post, it was mentioned that a good replacement motor for the MOROSO drive setup can be had at a reasonable price (and you don't have to wonder whether or not its been run a bazillion hours or water soaked) from your local NAPA store: Part # #PM250E 12V 99112. I don't know what the HP rating, current draw, or rpm the NAPA motor runs at - but I'd guess the NAPA guy should be able to tell ya.  Ryan 
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
