|
Author
|
Topic: Factory 0-60 times?
|
streetstang67
Gearhead Posts: 396
From: SC, USA
Registered: Nov 2002
|
posted 05-10-2003 10:33 PM
   
I was wondering what the 0-60 times or quarter mile times for '67 coupes were? or any other classic mustang with a 289? c code? a code? k code?
IP: Logged |
steve'66
Gearhead Posts: 7226
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 05-11-2003 04:00 PM
They ranged from 15 to 17 seconds in the 1/4 mile stock.  SteveW
IP: Logged |
MidLifCrisis
Gearhead Posts: 323
From: USA
Registered: Oct 2001
|
posted 05-11-2003 08:31 PM
SS67, I had a bone stock '68 Fastback with a 289 two barrel and C-4 auto. It had about 80K miles on it. It ran 16.4 or 16.8 in the 1/4 @ 84mph with street tires and stock single tube exhaust. A same generation coupe should be approx equal. As for A codes, you may have to rely on the guys here. Back in the day, the magazines usually timed only the quickest muscle cars ( big blocks and Shelby's) Take a Shelby GT-350, 15.04 @ 93.07 according to Sept'67 Car & Driver, and that will give you an approx K-code time. Even though the Shelby was rated at 306 HP, it was heavier than a coupe, so it all evens out. The A-code falls somewhere in between. Charlie
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
