|
Author
|
Topic: Clutch fork?
|
Skeeter
Gearhead Posts: 133
From: California
Registered: Dec 2001
|
posted 04-24-2003 12:25 PM
   
Can I use a stock ford clutch fork with a LakeWood Bell Housing? I dont think they make one?? Atleast that is what Summit said.Thanks,
Jason
IP: Logged |
MDF99
Gearhead Posts: 202
From: Hamilton, Ohio, USA
Registered: May 2001
|
posted 04-24-2003 02:42 PM
The clutch fork I use w/ my Lakewood bellhousing is a Ford part, it works great. I could get under there and try to see the clutch fork part # if you'd like. I'm sure Lakewood could tell you what would work as well.Matt
IP: Logged |
Rory McNeil
Gearhead Posts: 1311
From: Surrey, B.C. Canada
Registered: Nov 2000
|
posted 04-25-2003 02:54 AM
What is the application? On my 428 FE Fairmont, I used a regular FE fork with my Lakewood scattershield, worked fine. On my 85 Mustangs 302, I also have a Lakewood scattershield, the stock cable type fork does work, although the clutch cable points inward a bit, as the fork does not stick out as far as the cable mounting hole in the scattershield.------------------
78 Fairmont 428 4 speed 10.20@130mph
80 Fairmont 302 5 speed 12.8@105mph
85 Mustang NHRA Stocker under construction, 302 5 speed
59 Meteor (Canadian Ford) 2 dr sedan 332, auto
74 F350 ramp truck 390 4spd
IP: Logged | |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
