|
Author
|
Topic: Which Cam?
|
FALCOMANIA
Journeyman Posts: 60
From: Opelika Ala USA
Registered: Apr 2003
|
posted 04-23-2003 06:59 PM
   
Ok Fella's need some recomendation's on a cam. This will be a bracket car all I want is consistency not trying to rotate the earth. No roller(BUDGET) Solid or Hyd. don't matter to me.64Falcon Wagon just guessing 2900lbs.
302 .030 maybe 9.1
Big chamber 351 heads with bigger valves and some port work
Performer RPM intake 650 DP
Glide with brake 8in. conv 5400
5.14 gear
Would like it to be pretty agressive on the bottom end most all 1/8 mile racing.
Shift around 6200
Thanks Randy [This message has been edited by FALCOMANIA (edited 04-23-2003).]
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 04-23-2003 08:09 PM
282S Comp would do you well.
We have them in stock.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
capri man
Gearhead Posts: 7221
From: doerun, ga.
Registered: Nov 2000
|
posted 04-23-2003 08:24 PM
randy, can you run a brake in feetbrake??------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
bluestreek
Gearhead Posts: 1724
From: Athens,GA
Registered: Jul 2001
|
posted 04-23-2003 08:33 PM
What Alex said is good or maybe the Comp 31-639-5 race grind if you want to get a little more aggressive and exceed the rpms your aiming for. Those heads can go to 6500 easily.  ------------------
1966 Mustang Coupe: Custom glass hood and BIG scoop sits atop a 289 stroked to 331 c.i., Steel crank and girdle, 5.4 H-beams, Forged slugs, TFS alum. heads, ported Stealth 8020 intake, Xtreme 274 Solid Roller, Holley 750 HP, long tubes, 4speed, 9" 3.50 posi.
2nd pass: 12.11 @ 114 mph (7.80 @ 92 mph)
DanH
IP: Logged |
steve'66
Gearhead Posts: 9476
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 04-23-2003 08:33 PM
I like the 282s too. Great cam for what you're doing. SteveW
IP: Logged |
FALCOMANIA
Journeyman Posts: 60
From: Opelika Ala USA
Registered: Apr 2003
|
posted 04-23-2003 09:54 PM
Capri not gonna run foot feed top bulb  What kinda idle quality does this cam have and does Comp build any advance in there cams? Thanks
Randy
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 04-23-2003 11:19 PM
It's a mild rumpety rump, with a ton of torque.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
FALCOMANIA
Journeyman Posts: 60
From: Opelika Ala USA
Registered: Apr 2003
|
posted 05-16-2003 11:55 PM
Well I got the 280 Magnum and really like the idle quality makes my nothin motor sound narley Randy
IP: Logged |
scottford351
Journeyman Posts: 96
From: reedsville ohio usa
Registered: May 2003
|
posted 05-17-2003 12:07 AM
The extreme energy comp cam XE268H would work good with your compression. Its 224/230 .509/.512 power range 1600-5800.
IP: Logged |
Mustangsandmore Forums
