|
Author
|
Topic: "REV" brand valves
|
JCQuinn@work
Gearhead Posts: 320
From: Lakewood, CO, USA
Registered: Jun 2001
|
posted 03-31-2003 02:59 PM
   
I am not familiar with the "REV" brand of stainless steel valves. Does anyone have any feedback on them?John
IP: Logged |
kid vishus
Gearhead Posts: 3916
From: middle of NC
Registered: Oct 2000
|
posted 03-31-2003 03:02 PM
They are good valves. I had a set in a motor for awhile. Until I bent all of them by shearing the pin on the front of the camshaft.The story I heard was, two guys formed either Rev, or Ferrea. They had a parting of ways and the guy that left started the other company. Their address is in the same area as Ferrea's, so it could very well be true.
IP: Logged |
capri man
Gearhead Posts: 2728
From: doerun, ga.
Registered: Nov 2000
|
posted 03-31-2003 03:08 PM
i never used their valves but their springs are great. i think 800-398-6348 is their number. i think they have a website also. ------------------
mike r
racing is real
everything else is just a game.
81 capri-7.51 @89mph 1/8
1.54 60 ft.
http://prestage.com/site/site_display.asp?SiteID=141
IP: Logged |
JCQuinn@work
Gearhead Posts: 320
From: Lakewood, CO, USA
Registered: Jun 2001
|
posted 03-31-2003 03:21 PM
Wow that was quick. Thanks for the feedback, there is a good price on a set of them on e-bay. I think I will bid on them.Thanks again
John
IP: Logged |
JCQuinn@work
Gearhead Posts: 320
From: Lakewood, CO, USA
Registered: Jun 2001
|
posted 03-31-2003 04:41 PM
Well I bought em. all 16 valves for my GT-40 heads for $100. Swirl polished, undercut stems, stainless steel, hardend tips.John
IP: Logged |
Moneymaker
Administrator Posts: 18787
From: Lyons, IL, USA
Registered: May 99
|
posted 04-01-2003 01:44 AM
Good buy John.  ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
MattN
Journeyman Posts: 46
From: Mattoon, IL.
Registered: Feb 2002
|
posted 04-01-2003 10:17 PM
The valves in my dad's brand new AFR 205's are REV valves.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
