|
Author
|
Topic: Valve Clearance
|
martinliddiard
Journeyman Posts: 1
From: orpington,Kent<England
Registered: Mar 2003
|
posted 03-12-2003 12:09 PM
   
Hi Guys,I am hoping you can help me. I am trying to put an engine back together and do not no what sort of clearance I should be giving. I have a Comp Cams Extreme Energy part number CCA 35-250-4 and CCA832 Lifters with roller rockers. Would appreicate your advise on what the valve clearance should be. Thanks and regards, Martin
IP: Logged |
Red65
Gearhead Posts: 115
From: Northglenn, CO, USA
Registered: Jul 2002
|
posted 03-12-2003 01:12 PM
I used .100 piston to valve using the clay method.Here's CompCams link on valve clearance: http://www.compcams.com/catalog/021.html Welcome to M&M!!! [This message has been edited by Red65 (edited 03-12-2003).]
IP: Logged |
V8 Thumper
Gearhead Posts: 4377
From: Arizona
Registered: Dec 2001
|
posted 03-12-2003 09:39 PM
The general rule is .080 on the intake, .100+ on the exhaust. Unless you run Superstock   ------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
Mustangsandmore Forums
