|
Author
|
Topic: cheap hp
|
69_sportsroof
Gearhead Posts: 176
From: Camino Calif (yeah, it does snow here)
Registered: Aug 2000
|
posted 02-28-2003 10:56 PM
am gonna try to use all this stuf ive been saving for QUITE some time, save a few bucks, and build a new project heres what i have on hand.
D1ZZ-6010-B 4 bolt block/ D1ZZ-6303-A crank/ Crower steel rods/ '72 HO forged pistons/ D2ZX-6678-A oil pump kit 100 psi/ D0ZX-6507-A Titanium intakes 85gm./ D0ZX-6505-A Titanium exhausts 95gm./Cross Boss intake/ Inline 4V Carb 1 11/16 bores(the little one)/ Crane gold race rockers/ '71 Boss 351 heads/ C9ZZ-6A564-A guide plates/ C9ZZ-6A529-A screw in studs/ D0ZZ-6565-F pushrods 8.52"/Comp 292H cam/ rear sump pan & pickup/ windage tray/ Gapp & Roush water pump/ 14 lb webwe flywheel/ T5 (GM IROC Z Camaro) 9" w3.73 locker/ Lakewood bellhousing/ Mustang II front end/ rotofaze dist/ and enough little red & blue fittings to decorate a Xmas tree!! plus more stuf that i'll go sort through this weekend .Think this is an adequate start. Oh yeah' street motor probably never see much over 8 grand JAY ------------------
ALL THROTTLE NO BOTTLE !
69 sportsroof(351 C)
65 Ranchero(200)now 351W
72 Ln 700 (361)
IP: Logged |
jsracingbbf
Gearhead Posts: 1677
From: Batesville,MS. , U.S.A.
Registered: Mar 2002
|
posted 02-28-2003 11:24 PM
Sounds like am excellent start to me keep us posted on how it does! ------------------
Jerry
69 Mustang Pro ET Drag
70 Mustang retired former footbrake car
"This is FORD Country! On a Quiet night you can hear a Chevy Rust"
IP: Logged |
69_sportsroof
Gearhead Posts: 176
From: Camino Calif (yeah, it does snow here)
Registered: Aug 2000
|
posted 03-01-2003 09:42 AM
Will do...rotating assembly is being balanced now and I started cleaning up the ports last nite will get started on the adapter plates for the cross boss when i get to work today.............Jay ------------------
ALL THROTTLE NO BOTTLE !
69 sportsroof(351 C)
65 Ranchero(200)now 351W
72 Ln 700 (361)
IP: Logged |
Daniel Jones
Gearhead Posts: 495
From: St. Louis, MO
Registered: Aug 99
|
posted 03-01-2003 07:15 PM
You might want to review Alex's notes on titanium valves before you assemble those heads. If you don't already have them, I have the technical notes on the inline 4V carbs around here someplace. Dan Jones
IP: Logged |