|
Author
|
Topic: ignition Advance
|
Stang72
Journeyman Posts: 20
From: Arkel,Zuid-Holland,Holland
Registered: Jan 2003
|
posted 01-27-2003 10:02 AM
   
Hi ,I have an Mallory Unilite with vac. adv. in my 302.Does anyone knows what the factory setting is of the advance of the ignition??.
Does it has to be set after installing??? my timing is now set on 10 dgrs bdc
IP: Logged |
Moneymaker
Administrator Posts: 19704
From: Lyons, IL, USA
Registered: May 99
|
posted 01-27-2003 10:55 AM
Welcome to M&M 
As a rule, most Mallory distributors have 12 degrees advance in them. Double that and you get 24 degrees in the distributor. Add the 10 you have on the crank and you have a total of 34 without the vaccum.
They all come with a plastic "curve key" that is used to tailor your advance and rate.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Stang72
Journeyman Posts: 20
From: Arkel,Zuid-Holland,Holland
Registered: Jan 2003
|
posted 01-28-2003 02:22 AM
Hi Alex,thnx for the data... now here's the trouble. it didn't came with anything...... only the dist. can i adjust it otherwise??
IP: Logged |
Moneymaker
Administrator Posts: 19704
From: Lyons, IL, USA
Registered: May 99
|
posted 01-28-2003 11:21 AM
Write to Mallory/Mr.Gasket for a curve key and have them mail you one. They are very good that way.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00,'01,'02,&'03
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Just Strokin
Gearhead Posts: 754
From: Tuscaloosa, Alabama
Registered: Dec 2001
|
posted 01-28-2003 01:06 PM
Ask them for the instructions also.------------------
Larry No fast Fords at this time but one fine cruising 96 F350 CC DRW Power Strokin diesel.
And one rusty 64 Fairlane nick-named the Rust Bucket....And sometimes called the Money Pit... The sounds of a brain dropping into gear.....
"Buzzzzzz.......Click"
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
