|
Author
|
Topic: 4150 Manual choke diagram/Jpeg needed
|
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 12-17-2002 06:53 AM
   
I am in the process of adding the choke stuff to a 750 DP annular Holley.
I seem to be missing (or not recognize) the fast idle cam lever. You know, the thing the fast idle adjustment screw rides on.
Anybody have any Jpegs or good exploded diagram of the choke mechanism on a holley?
The old Dave Emmanuel holley book I have does not have a good view.
BTW is the choke blade supposed to be bent on one side of the axle?
Also, I had to notch the butterfly to clear the boosters. Like the new Demon carbs choke.
IP: Logged |
Just Strokin
Gearhead Posts: 754
From: Tuscaloosa, Alabama
Registered: Dec 2001
|
posted 12-17-2002 07:28 AM
Here is a pic from Holley to see if you have all the parts......http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSCA/45-225.html Here is an exploded view of the carb/choke... http://www.holley.com/HiOctn/TechServ/TechInfo/f4150-60.html and same pic but smaller http://www.holley.com/HiOctn/TechServ/TechInfo/4150-60.html Hope this helps you........ ------------------
Larry No fast Fords at this time but one fine cruising 96 F350 CC DRW Power Strokin diesel.
And one rusty 64 Fairlane nick-named the Rust Bucket....And sometimes called the Money Pit... The sounds of a brain dropping into gear.....
"Buzzzzzz.......Click"
IP: Logged |
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 12-17-2002 08:13 AM
I think I may have a piece on backwards.....
I'll look at it some more tonight.
IP: Logged |
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 12-18-2002 10:03 AM
Got it fixed.
The lever with the adjusting screw for fast idle comes in two sizes (width spacing).
I had the wrong one one.
Rummaged through some carb parts and found the correct one.
Now seems to work great.
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
