|
Author
|
Topic: Removing shock towers?
|
65_289
Gearhead Posts: 761
From:
Registered: Jul 2001
|
posted 12-11-2002 10:17 PM
   
Is there any way to do it, short of buying a $2000 Mustang II conversion kit?
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 12-11-2002 10:45 PM
Removing the shock towers is the easy/cheap part.  The new suspension gets pricey. SteveW
IP: Logged |
65_289
Gearhead Posts: 761
From:
Registered: Jul 2001
|
posted 12-11-2002 10:58 PM
quote:
Originally posted by steve'66:
Removing the shock towers is the easy/cheap part. The new suspension gets pricey. SteveW
That's what I was afraid of.
IP: Logged |
bigbore
Journeyman Posts: 17
From: Richardson,TX,USA
Registered: Nov 2002
|
posted 12-12-2002 11:21 AM
Ford managed to get a 390/428 between the shock towers in 68.
IP: Logged |
jsracingbbf
Gearhead Posts: 2751
From: Batesville,MS. , U.S.A.
Registered: Mar 2002
|
posted 12-12-2002 06:50 PM
I just did this to mine, well sortof, I already had a mustang 2 STOCK front end. It is going to cost you about $1200.00 to $1800.00 minumum depending on whether or not you use tubular A arms or not. UNLESS, you can find a GOOD donor mustang 2 front end, then you might do it for less. Jerry
IP: Logged |
Mustangsandmore Forums
