|
Author
|
Topic: crank
|
two89w
Gearhead Posts: 196
From: sydney australia
Registered: Sep 2002
|
posted 12-02-2002 01:24 AM
what would be a desirable crank(scat, eagle or other brand) to run in one of those 440ci 302 based stroker engines?
IP: Logged |
Moneymaker
Administrator Posts: 19704
From: Lyons, IL, USA
Registered: May 99
|
posted 12-02-2002 10:31 AM
You cannot build a 440 inch combination with a 302 block. You need a 351 block as a starting point. The Scat stuff is OK. ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
IP: Logged |
two89w
Gearhead Posts: 196
From: sydney australia
Registered: Sep 2002
|
posted 12-02-2002 01:12 PM
what is the biggest you can take one of those
dart 302 blocks out to?
IP: Logged |
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 12-02-2002 03:45 PM
quote:
Originally posted by two89w:
what is the biggest you can take one of those
dart 302 blocks out to?
With a 4.185 bore (Dart block)and a 3.4 stroke, you get around 375 cubic inches.
Of course this cost about the same as the 440 based on the 9.5" Dart block.
IP: Logged |
two89w
Gearhead Posts: 196
From: sydney australia
Registered: Sep 2002
|
posted 12-02-2002 11:50 PM
ahhh ok it must be a print error on there web site. it says 4.185 bore and 4inch stroke
IP: Logged |
Mpcoluv
Gearhead Posts: 945
From: Charlotte NC usa
Registered: Apr 2001
|
posted 12-03-2002 07:30 AM
quote:
Originally posted by two89w:
ahhh ok it must be a print error on there web site. it says 4.185 bore and 4inch stroke
No, a 4 inch stroke is not possible in a 8.2" deck
IP: Logged |