|
Author
|
Topic: extreme energy
|
two89w
Gearhead Posts: 196
From: sydney australia
Registered: Sep 2002
|
posted 11-15-2002 07:03 AM
   
has anybody used or heard any reports on the new extreme energy solid flat cams from comp cams?? preferably the 302 windsor type?
IP: Logged |
MrWesson22
Gearhead Posts: 1209
From: Dacula, GA
Registered: Sep 2000
|
posted 11-15-2002 02:04 PM
I have an Xtreme energy solid flat tappet in my 351C. Comparing specs with other cams, the ramp angles are faster than a lot of hydraulic roller cams, and they approach some of the "street" solid rollers even. I like it, but it's hard to compare with other cams except on paper. It's not like I've run 30 different cams in this engine, ya know? I'd recommend it, and I'd recommend getting a custom grind. It's no more money than an off the shelf, so why not?
------------------
Neal 69 Gulfstream Aqua Grande
351C/4sp
https://mustangsandmore.com/ubb/MrWesson22.html
IP: Logged |
SteveLaRiviere
Administrator Posts: 33371
From: Saco, Maine
Registered: May 99
|
posted 11-15-2002 02:15 PM
Neal, what is your grind and how is your bottom end?------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150 Be sure to remember our sponsors, Mustangs Plus, NPD, and Osborn Reproductions.
IP: Logged |
MrWesson22
Gearhead Posts: 1209
From: Dacula, GA
Registered: Sep 2000
|
posted 11-16-2002 12:56 PM
282/288 adv 244/[email protected]" .590/.600 108LSABottom end? With 4V cleveland heads? What bottom end?  It's really a 3K+ cam.
------------------
Neal 69 Gulfstream Aqua Grande
351C/4sp
https://mustangsandmore.com/ubb/MrWesson22.html
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
