|
Author
|
Topic: Front Engine Dragsters
|
Boss302
Gearhead Posts: 841
From: Coleman, Wisconsin
Registered: Jan 2002
|
posted 10-23-2002 05:34 PM
   
Or sometimes called 'Slingshot' dragsters....My question is, how would a regular person, that would be me, go about trying to build one of these?? Is there anyplace that would sell blueprints? Thanks for any help. 
IP: Logged |
Dad Vishus
Gearhead Posts: 418
From: Moscow, Iowa, USA
Registered: Dec 2001
|
posted 10-23-2002 05:47 PM
There are new ones built all the time for nostalgia racers. Don't know for sure who mkes kits, but I'm sure someone does.Maybe there are nostalgia websites out there? In the Midwest and West coast area, there is a circuit they run. The fuelers are running in the mid 5s. Maybe do a search on nostalgia drag racing.
IP: Logged |
Kyle
Gearhead Posts: 210
From: Sumner, WA
Registered: Dec 2001
|
posted 10-23-2002 09:21 PM
S&W Racecars has them. Not sure if it is just sold as a welded chassis or if they sell plans too. You can find them on the web.
IP: Logged |
TomP
Gearhead Posts: 4637
From: Delta BC Canada
Registered: Dec 99
|
posted 10-23-2002 10:47 PM
Tuttle sells kits too, he has a website, California Chassis is the name of his company.
I think Mark Williams sells most everything for one also. Lotsa used ones out there, just watch that the thing is certifiable...you may have to re-do the whole schmeer if not.
IP: Logged |
TomP
Gearhead Posts: 4637
From: Delta BC Canada
Registered: Dec 99
|
posted 10-23-2002 10:48 PM
Here's Dave's sitehttp://www.dragsters.net/
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
