|
Author
|
Topic: Scat 418w
|
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-26-2002 04:08 PM
   
Hello M&M,
I'm thinking about acquiring the 418w stroker kit from Scat. What are your opinions of this kit?Thanks,
Jason
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 09-26-2002 05:36 PM
Is it the second one down on this page?
http://www.scatcrankshafts.com/specialsmblckkits02.htmlSteveW
IP: Logged |
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-26-2002 08:11 PM
That would be the one Steve.Thanks,
Jason
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 09-26-2002 10:42 PM
Jason,That one looks good to me. Be sure to have it balanced to the 28oz specs. and l/w forged race pistons to equal the c/r you want. Remember flat tops will equal over 12-1 compression with 60cc combustion chambers.  Talk to them about the c/r with whichever heads you choose. My choice would be Edel. Vic Jr's. They are available in 60cc or 70cc. The 70cc would be the choice with flat top pistons to keep your c/r low enough for pump gas. Good luck, SteveW
IP: Logged |
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-26-2002 10:55 PM
Thanks Steve,
I have a set of Dart seniors with stage three port work. they offer a JE piston with a 17cc dish which will put the c/r at about 10.5Thanks for your help.
maybe i'll see ya at the track next year, Jason
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 09-26-2002 11:28 PM
Jason,Cool, are you in the Bay area? SteveW
IP: Logged |
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-27-2002 12:05 AM
Im in the Bay Area. I met you when you first ran your 408 at Sacramento.Jason
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 09-27-2002 12:54 AM
Jason,OK I remember you now! What've you been up to lately?
SteveW
IP: Logged |
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-27-2002 12:28 PM
Just been working on the Mustang a bit. I hope to have it back together before rain hits. Maybe if i'm lucky I can get a couple of passes in at Sears Point before they close. When do they usually shut down for the winter?Jason
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 09-27-2002 12:47 PM
The last Weds night is scheduled for Nov 13th. SteveW
IP: Logged |
Skeeter
Gearhead Posts: 160
From: California
Registered: Dec 2001
|
posted 09-27-2002 02:57 PM
Thanks!
IP: Logged |
Mustangsandmore Forums
