| 
| Author | Topic:   Thru hole in the side of the airhorn??? |  
	| V8 Thumper Gearhead
 Posts: 1468From: Orange, Ca. United States of America
 Registered: Dec 2001
 |  posted 08-08-2002 11:38 PM         WTF
   Holley 3310-1.  Just forward of the secondary diaphragm, just below the air cleaner flange... there's about a 5/16" hole, not good  Tap and plug, or??? IP: Logged |  
	| Rory McNeil Gearhead
 Posts: 714From: Surrey, B.C. Canada
 Registered: Nov 2000
 |  posted 08-09-2002 02:35 AM         This hole points to the right front, on an angle, right? If so, there is normally a piece of round tubing, approx. 1" long in this hole. This is to supply filtered air for the hot air tube to the exhaust manifold, on an automatic choke set up. I normally just put a rubber hose cap onto the tube, but since yours is missing, it could be tapped & plugged, or just epoxy it in.
 ------------------78 Fairmont 428 4 speed 10.20@130mph
 80 Fairmont 302 5 speed 12.8@105mph
 85 Mustang NHRA Stocker under construction, 302 5 speed
 IP: Logged |  
	| Moneymaker Administrator
 Posts: 13208From: Lyons, IL, USA
 Registered: May 99
 |  posted 08-09-2002 07:16 AM         10-4
  ------------------Alex Denysenko
 Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator
 NHRA/IHRA/SRA memberNHRA and IHRA SS/LA National Record Holder '00, '01, & '02
 Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
 Part time secret agent license #0089
 Professional Manwhore
 The Barry of BarrysGrrl
 IP: Logged |  |