|
Author
|
Topic: Edelbrock Heads Install Qs
|
Glens67
Gearhead Posts: 495
From: Middleton, ID
Registered: Mar 2002
|
posted 06-28-2002 05:29 PM
   
Well I have the "new" heads reworked, new springs,retainers and keepers.Valves and seats trued up. When I get the report from Metcalf.s shop I will post the Corrections. Now the install questions.
What kind of oil restrictor should I use?
I will be using my Erson rocker setup are there any concerns about spacing on the Rockers?
Thanks
Glen ------------------
Glen
67 GT 390
65 Galaxie 500 XL 4 Speed
It was not a Red Light they gave me a Slow Tree
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-29-2002 10:27 PM
ttt
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-30-2002 07:45 PM
How ya coming?
By the time you get an answer you'll have the job done. At least I hope so, I'd hate to see you racing the truck on the 4th.  SteveW
IP: Logged |
Glens67
Gearhead Posts: 495
From: Middleton, ID
Registered: Mar 2002
|
posted 07-01-2002 02:27 AM
Had to make new bushings for the Erson Rockers ( Edl spaced the Intake valve .060 further apart than stock) Motor is installed, all bottom drive line is complete, just need to install rockers prime the oil system, adjust the rockers install the carb and radiator and run the beast. Should have it complete by Tuesday. I'm taking Wed off to put some miles and tune it for Wed Night. shure hope I don't have to run the Truck.
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-01-2002 09:13 PM
Glenn,Sounds great, where are you and Scott gonna pit? Behind the tower, or? SteveW
IP: Logged |
Glens67
Gearhead Posts: 495
From: Middleton, ID
Registered: Mar 2002
|
posted 07-02-2002 07:30 AM
In the turn 10 parking area.
IP: Logged |
Glens67
Gearhead Posts: 495
From: Middleton, ID
Registered: Mar 2002
|
posted 07-02-2002 07:41 AM
In the turn 10 parking area.
IP: Logged |
TomP
Gearhead Posts: 6120
From: Delta BC Canada
Registered: Dec 99
|
posted 07-02-2002 12:57 PM
Turn 10??  You DRAG racing this thing or is it a teabagger? 
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-02-2002 09:04 PM
quote:
Originally posted by Glens67:
In the turn 10 parking area.
Same place you were last time? How early do you get there to find a spot? We'll have the M/H plus my truck and trailer so we'll probably be up the return road. Barbara's got lots of food so be sure to bring your hog (mini bike)  C'ya Wednesday night. SteveW
IP: Logged |
Glens67
Gearhead Posts: 495
From: Middleton, ID
Registered: Mar 2002
|
posted 07-03-2002 02:52 AM
Got there at 7am Hit me on the cell 477-0011
See you Wed
Glen
IP: Logged |
Buster
Gearhead Posts: 1635
From: Hurricane alley
Registered: May 2002
|
posted 07-03-2002 06:54 AM
Well, I got up this morning at 5:00am for a meeting that was scheduled for next week, grrr ;(
IP: Logged |
Mustangsandmore Forums
