|
Author
|
Topic: 9" pinion pilot bearing #?
|
V8 Thumper
Gearhead Posts: 4681
From: Phoenix, Arizona
Registered: Dec 2001
|
posted 05-23-2002 11:46 AM
   
Not the pinion support bearings, but the pilot bearing, the one that presses into the gearcase. All of my parts vendors look at me like this  when I ask them to get me one... I've got all the other bearings/races, I just need the pilot bearing number if anyone has records/invoices. The pinion stub diameter is 1.108", the outter race diameter is 1.850" 
IP: Logged |
jkilroy
Gearhead Posts: 1808
From: Vicksburg, MS
Registered: Dec 99
|
posted 05-23-2002 12:11 PM
Explain to them that it is the bearing that supports the far end of the pinion. You might try Moser Engineering at...http://www.moserengineering.com/ I am sure they can help you and they are a ton cheaper than Mark "They Must Be Crack Smoking" Williams. ------------------
Jay Kilroy
68' Fastback GT 390
"No such thing as a cam thats too big"
IP: Logged |
Just Strokin
Gearhead Posts: 754
From: Tuscaloosa, Alabama
Registered: Dec 2001
|
posted 05-23-2002 12:43 PM
PN is R-1535-TAVhttp://emporium.markwilliams.com/prodinfo.asp?prodid=1893 Retainer is here.... http://emporium.markwilliams.com/prodinfo.asp?prodid=1895 I think the ford pn is C2AZ 4625 B and called PINION GEAR SUPPORT BEARING and the retainer is B7AZ 4627 A and called PINION GEAR SUPPORT RETAINER [This message has been edited by Just Strokin (edited 05-23-2002).] [This message has been edited by Just Strokin (edited 05-23-2002).]
IP: Logged |
V8 Thumper
Gearhead Posts: 4681
From: Phoenix, Arizona
Registered: Dec 2001
|
posted 05-23-2002 07:20 PM
Thank you guys, great info as always
IP: Logged |
Mustangsandmore Forums
