|
Author
|
Topic: Traction Bar question
|
65_289
Gearhead Posts: 761
From:
Registered: Jul 2001
|
posted 05-13-2002 05:58 PM
   
I don't know if this is a dumb question or not. On my Slide-a-Link bars, there is a little bar behind the leaf spring bushing. Does this bar go on top of or under the leaf spring? Here is a pic of Cal-Tracs. The bar in question is in the same place on my bars; right behind the bushing.  ------------------
1965 Coupe, Tremec 3550, Steeda Tri-Ax, Cable Clutch conversion, 9" N case, 4.11's, Detroit Soft Locker, 31 spline Moser axles, Daytona pinion support,, Biondo Line Lock, Ford XB3 longblock, x303 heads, B-Cam, 9:1 comp., Tri-y headers, cut-outs, Ford Racing high-torque mini-starter, Pertronix Ignitor & Flamethrower coil, 650 double pumper, Edelbrock RPM intake, K&N air, Holley electric fuel pump & AFPR, dual 2-chamber Flowmasters, Summit 3-way fronts, Rancho 5-way rears, 5-leaf springs, Chrome Export Brace, Griffen Radiator, Comp. Eng. subs. [email protected] w/ a 1.837 60' [This message has been edited by 65_289 (edited 05-13-2002).]
IP: Logged |
Larry Jennings
Gearhead Posts: 540
From: Redwood City, Ca. USA
Registered: Apr 2000
|
posted 05-13-2002 07:19 PM
Top  .------------------
A conference is a gathering of important people who singly can
do nothing, but together can decide that nothing can be done.
- Fred Allen
IP: Logged |
65_289
Gearhead Posts: 761
From:
Registered: Jul 2001
|
posted 05-13-2002 08:03 PM
quote:
Originally posted by Larry Jennings:
Top .
Gracias. We figured we'd get out there, and it would fit both ways. This makes it easier.
IP: Logged |
Larry Jennings
Gearhead Posts: 540
From: Redwood City, Ca. USA
Registered: Apr 2000
|
posted 05-13-2002 10:23 PM
Not many questions can be fully answered in one word  .------------------
Have you ever noticed? Anybody going slower than you is an
idiot, and anyone going faster than you is a moron.
- George Carlin
IP: Logged |
mustangboy
Gearhead Posts: 1147
From: Ont, Canada
Registered: Mar 2002
|
posted 05-14-2002 01:57 AM
65-289 what kind of tires are you running and what rpms are you launching at.I'm running 100.94 mph but my best et is only a 13.69.My 60 fts are in the 2.0s with a best of 1.97
IP: Logged |
65_289
Gearhead Posts: 761
From:
Registered: Jul 2001
|
posted 05-14-2002 12:28 PM
quote:
Originally posted by mustangboy:
65-289 what kind of tires are you running and what rpms are you launching at.I'm running 100.94 mph but my best et is only a 13.69.My 60 fts are in the 2.0s with a best of 1.97
The tires are 26x8.5 ET Drags on 15x8 rims. My 60' time on that 13.47 run was a 1.837. I think I was launching at about 4200 then. Now that I have traction bars, I will be launching as high as the track can hold. 5500 rpm launches, here I come!!! [This message has been edited by 65_289 (edited 05-14-2002).]
IP: Logged | |
Mustangsandmore Forums
