|
Author
|
Topic: SVO intake?
|
2BAD6568s
Gearhead Posts: 136
From: South Point, Ohio, USA
Registered: Feb 2002
|
posted 05-08-2002 09:43 PM
   
Will an svo nascar intake fit on a 302 with 302 svo aluminum heads? would it be a good drag race intake?
IP: Logged |
Daniel Jones
Gearhead Posts: 898
From: St. Louis, MO
Registered: Aug 99
|
posted 05-09-2002 03:29 PM
That depends upon which SVO aluminum heads you have. The NASCAR manifolds are for the Cleveland-based canted valve high port (A3, B351, C302) or Yates aluminum heads. They can make an excellent drag intake.Dan Jones
IP: Logged |
2BAD6568s
Gearhead Posts: 136
From: South Point, Ohio, USA
Registered: Feb 2002
|
posted 05-09-2002 04:18 PM
quote:
Originally posted by Daniel Jones:
That depends upon which SVO aluminum heads you have. The NASCAR manifolds are for the Cleveland-based canted valve high port (A3, B351, C302) or Yates aluminum heads. They can make an excellent drag intake.Dan Jones
the number of the heads are:M-6049-X304
and the intake is: M-9424-E351
thanks, steve
IP: Logged |
67coupe
Gearhead Posts: 491
From: dallas NC usa
Registered: Nov 2000
|
posted 05-10-2002 12:03 AM
im not positive but isnt the dack height on the nascar motor 9.2 like cleavland verses the 8.2 on the 302?  ------------------
Josh
67 coupe with 351c
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5
IP: Logged |
Daniel Jones
Gearhead Posts: 898
From: St. Louis, MO
Registered: Aug 99
|
posted 05-10-2002 10:51 AM
IIRC, X304 are Windsor heads so that intake won't work. Use a Victor Jr. >isn't the deck height on the nascar motor 9.2 like cleveland verses the 8.2 on the 302 Yes but Motorsport intakes for the canted valve aluminum high port head family are available for 8.2", 9.2", and 9.5" deck heights. Dan Jones
IP: Logged |
Daniel Jones
Gearhead Posts: 898
From: St. Louis, MO
Registered: Aug 99
|
posted 05-10-2002 11:16 AM
>M-9424-E351That intake is form a 9.2" deck (351C) block, BTW. M-9424-B302 would be for an 8.2" deck block. Dan Jones
IP: Logged |
Mustangsandmore Forums
