|
Author
|
Topic: Pinion Support Bolts
|
67Coupster
Journeyman Posts: 78
From: Fortson, GA, USA
Registered: Oct 2001
|
posted 04-13-2002 12:00 PM
   
It is ok to use standard grade 8 bolts on the pinion support? I'm building up a "N" case with the FRPP daytona pinion support. Thanks!------------------
James
67 Coupe
393W, AFR 185, 4 Speed, 4.11 9 inch
7.09 @ 97MPH 1/8
1.55 60'
IP: Logged |
Fordwiser
Journeyman Posts: 88
From: Metamora, Illinois
Registered: Dec 2000
|
posted 04-13-2002 01:18 PM
Think Alex and some of the others discussed this a while back, they said studs with lock nuts work best, think they said ARP makes them.
IP: Logged |
steve'66
Gearhead Posts: 3753
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 04-13-2002 04:34 PM
ARP's studs are the best, but we're using grade 8 bolts with locktite and everything is aok so far.  SteveW
IP: Logged |
67Coupster
Journeyman Posts: 78
From: Fortson, GA, USA
Registered: Oct 2001
|
posted 04-13-2002 07:35 PM
Thanks, I have some brand new Grade 8 bolts already, I guess I'll use them and some locktite when I torque them for now. Anybody have the PN for the ARP studs and locknuts handy? ------------------
James
67 Coupe
393W, AFR 185, 4 Speed, 4.11 9 inch
7.09 @ 97MPH 1/8
1.55 60'
IP: Logged |
RPM289
Journeyman Posts: 27
From: Phenix City, AL
Registered: Feb 2002
|
posted 04-13-2002 07:50 PM
Hey James check you e-mail!!------------------
66' Mustang
95' Lightning
65' Mustang
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
