|
Author
|
Topic: pinion angle
|
speedy
Gearhead Posts: 245
From: Parkersburg WV M&M #277
Registered: Nov 99
|
posted 02-09-2002 03:51 PM
 
I'm installing SSM lift bars,upper control arms and Eibach springs on a 92 Mustang.It says the best pinion angle is 2 deg. under full power.What's the best angle to start with(suspension loaded,under no power)to achieve the 2 deg. angle?Andy
|
Just Strokin
Gearhead Posts: 754
From: Tuscaloosa, Alabama
Registered: Dec 2001
|
posted 02-09-2002 06:20 PM
Most of the companies like Alston or Chassisworks recommend 2-4 degrees down from the angle of the driveshft as a starting point. The wraping of the axle housing under takeoff corrects this to 0 degrees.
|
steve'66
Gearhead Posts: 9835
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 02-09-2002 08:54 PM
I agree with 2-4 degrees down. FWIW  SteveW
|
