|
Author
|
Topic: FMS SVO intake work on 351c
|
DRAGSTANG351
Journeyman Posts: 67
From: FLORIDA
Registered: Dec 2001
|
posted 01-25-2002 01:03 AM
   
can a ford motorsport svo intake part# M-9424-E351 made for 9.2 deck height and raised port robert yates cylinder heads be modified to fit a 351c w/4v heads, the guy i talked with today said that it would fit with some milling done to the sides and bottom, does anyone know what exactly would need to be done besides getting the ports matched up and the floors filled in on the head ports? should i be more interested in getting the bolt holes lined up rather than the ports matched? and would the effort be worth the trouble? has anyone ever heard or seen this done before, i figured i better check in here first, i don't need another costly mistake i would definitely appreciate any info or feedback on this subject  thanks
kelly
IP: Logged |
themav
Journeyman Posts: 21
From: Buena Park Calif. USA
Registered: Jan 2002
|
posted 01-27-2002 04:37 PM
I am running a mototsport M9424-A351 on my boss 351, it was a lot of work closing up and raising the intake ports and it was done quite a few years ago, if you drive the car on the street a lot its probably not the way to go unless you run a lot of gear so your answer is yes it can be done.
IP: Logged |
Moneymaker
Administrator Posts: 27499
From: Lyons, IL, USA
Registered: May 99
|
posted 01-27-2002 10:11 PM
Wait another month for the reissue of the Holley/Weiand Strip Dominator. ------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
US Class Nationals link
IP: Logged |
Mpcoluv
Gearhead Posts: 1341
From: Charlotte NC usa
Registered: Apr 2001
|
posted 01-28-2002 12:28 PM
quote:
Originally posted by Moneymaker:
Wait another month for the reissue of the Holley/Weiand Strip Dominator.
I really don't get Holley. Why wait so long to re-introduce something you already have the tooling for. The cost of re-introduction has to be very low....
Are they really going to re-introduce them in a month?
IP: Logged |
MrWesson22
Gearhead Posts: 1286
From: Dacula, GA
Registered: Sep 2000
|
posted 01-28-2002 12:40 PM
From what I've seen from Holley, I wouldn't hold my breath on that 1 month introduction. Wasn't it originally supposed to be reintroduced like a year ago? I know it's gotten pushed back a few times. I do know eventually I'll be running one with a bigger carb, but the torker and 770 street avenger will hold me over for a while. I'm still excited about the s.d.'s reintroduction!
------------------
Neal
Member #723
[email protected] AIM: MrWesson22 69 Gulfstream Aqua Grande
351C/Toploader 4sp
IP: Logged |
Mustangsandmore Forums
