|
Author
|
Topic: cam range?
|
the last dive
Gearhead Posts: 147
From: sydney australia
Registered: Dec 2001
|
posted 01-13-2002 05:43 AM
  
what would the rpm range be of these two solid(comp)cams in a 347? 294 248 @.050 560lift 110 lobe sep the other 282 236 @.050 528 lift 110 lobe sep
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 01-13-2002 12:05 PM
According to Comp Cam's catalog, the 294S is 2500-6500 rpm operating range.
{Great for street/strip. 4 speed or automatic w/ 3500 stall, intake, headers, low gears, very rough idle, 10-1 compression}
The 282S is 2000-6000 rpm operating range.
{For street machines. Lower axle ratio, and 2500 stall converter, rough idle.}
We run the 282S in the 351w and it idles like a pussy cat. Great bottom end torque too.  SteveW
IP: Logged |
Jerry Piner
Gearhead Posts: 229
From: staunton, va
Registered: Dec 2001
|
posted 01-14-2002 08:58 AM
Steve 66 was just wondering how you like that 282S Cam, what engine combination, stall, gear you run with it. How does it run?
IP: Logged |
steve'66
Gearhead Posts: 9533
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 01-14-2002 10:04 AM
Jerry,It's a little small now with the converter stalling at 4000 rpm. But it was a fine street cam, made good power and idled well. The engine is a 10-1 Edelbrock RPM heads and intake w/ 750 Holley on top.
SteveW
IP: Logged | |
Mustangsandmore Forums
