|
Author
|
Topic: Aussie company "Active"?
|
Mpcoluv
Gearhead Posts: 834
From: Charlotte NC usa
Registered: Apr 2001
|
posted 11-14-2001 06:28 PM
   
Does anybody know of a website for the manufacturers of the Active "Vapours" intake manifold? I think they also make some Alum. heads that are half way between a 2V and a 4V cleveland.thanks ------------------
Jim Sams
'69 mustang Coupe
372C
IP: Logged |
kid vishus
Gearhead Posts: 3894
From: middle of NC
Registered: Oct 2000
|
posted 11-14-2001 06:32 PM
Sorry, I dont. I bought my Active intake from a Pantera shop out of California.
IP: Logged |
n2oMike
Gearhead Posts: 1367
From: Spencer, WV
Registered: Jan 2001
|
posted 11-14-2001 10:02 PM
The link in the "heads" post that came out about the same time as this post is a Pantera site that has info on the Active intake.http://pim.net/ausman.html Good Luck! ------------------
Mike Burch
66 mustang real street
302 4-speed 289 heads
10.63 @ 129.3
http://www.geocities.com/carbedstangs/cmml_mburch.html
http://www.fortunecity.com/silverstone/healey/367
IP: Logged |
kcode
Gearhead Posts: 2468
From: alvaton,ky,usa Suburb of Bowling Green, M&M #79, MCA #29208
Registered: Jun 99
|
posted 11-14-2001 10:08 PM
Jim,
You might try this company, I talked with them at the Columbus Ohio swap meet. They do alot with 351 Falcons:Australian Muscle Parts, Mike Fielder
[email protected] they have a California distribution phone of 562-28-9764 fax 562-428-2060 Thats all I know. Mike
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
