Brought to you in part by:

.

Shop Eastwood for your Auto Restoration Needs!


  Mustangsandmore Forums
  Ford Racing
  Cleveland ran [email protected] I'm finally happy!

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   Cleveland ran [email protected] I'm finally happy!
70coupe
Gearhead

Posts: 346
From: Toronto,Ontario,Canada
Registered: Aug 2000

posted 09-03-2001 06:31 PM     Click Here to See the Profile for 70coupe     Edit/Delete Message   Reply w/Quote
Conditions at the track were excellent. Temperature 65, humidity 49% and the car ran [email protected]! I pulled my power valve and put in a plug and ran 81 square on my 750dp. The car is also finally running consistant times. Couldn't be happier! Well, a 12.4 would be nice.

PS. Way to climb that point ladder "big block capri"

[This message has been edited by 70coupe (edited 09-03-2001).]

IP: Logged

steve'66
Gearhead

Posts: 6352
From: Sonoma,CA,USA
Registered: Mar 2000

posted 09-03-2001 07:16 PM     Click Here to See the Profile for steve'66   Click Here to Email steve'66     Edit/Delete Message   Reply w/Quote
AWESOME!!

I'm happy for you. Running the carb square is the best, eh? Good job! New best times are great. Keep it up,

SteveW

IP: Logged

Greenstang
Gearhead

Posts: 908
From: its all a fog..
Registered: May 2001

posted 09-03-2001 08:51 PM     Click Here to See the Profile for Greenstang   Click Here to Email Greenstang     Edit/Delete Message   Reply w/Quote
Can you give me a parts list on that motor?
I am in the midst of planning mine right now and am curious how it compares

------------------
Marcus
Audi R8-
The new definition of "The Unfair Advantage."

IP: Logged

70coupe
Gearhead

Posts: 346
From: Toronto,Ontario,Canada
Registered: Aug 2000

posted 09-03-2001 09:19 PM     Click Here to See the Profile for 70coupe     Edit/Delete Message   Reply w/Quote
351c 4v closed chamber heads, roller rockers with 7/16 screw in studs, Crane solid cam .554/.577 with 238/248 [email protected],trw forged flat tops,torker intake with Holley 750dp mech secondaries,MSD 6AL with blaster coil,C6 tranny with 8 3/4" 5000 stall,4:11 gears. Shift at 6200 through the traps at around 6350.

[This message has been edited by 70coupe (edited 09-03-2001).]

IP: Logged

chips67
Gearhead

Posts: 651
From: louisville, ky, usa
Registered: Jul 2001

posted 09-03-2001 10:31 PM     Click Here to See the Profile for chips67   Click Here to Email chips67     Edit/Delete Message   Reply w/Quote
come a long way since a month ago. car has more in it i believe, keep tunning, baby steps.

------------------
67 coupe, 650dp and rpm intake on 5.0 with afr 165 heads, 4 speed, 4.11's.....best so far is [email protected] in 1/8 mile with 1.78 60ft. time.

IP: Logged

Greenstang
Gearhead

Posts: 908
From: its all a fog..
Registered: May 2001

posted 09-03-2001 10:58 PM     Click Here to See the Profile for Greenstang   Click Here to Email Greenstang     Edit/Delete Message   Reply w/Quote
Thanx much!
That mirrors my parts list nearly exactly...

------------------
Marcus
Audi R8-
The new definition of "The Unfair Advantage."

IP: Logged

Moneymaker
Administrator

Posts: 19686
From: Lyons, IL, USA
Registered: May 99

posted 09-04-2001 03:48 PM     Click Here to See the Profile for Moneymaker   Click Here to Email Moneymaker     Edit/Delete Message   Reply w/Quote
Good job!

------------------
Alex Denysenko
Co-Administrator and Moderator
NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00 & '01
Fleet of FoMoCo products
Moneymaker Bio
US Class Nationals link

IP: Logged

clevelandstyle
Gearhead

Posts: 614
From: Connersville, IN
Registered: Jul 2001

posted 09-04-2001 07:44 PM     Click Here to See the Profile for clevelandstyle     Edit/Delete Message   Reply w/Quote
Good job. What were your 60's?

IP: Logged

70coupe
Gearhead

Posts: 346
From: Toronto,Ontario,Canada
Registered: Aug 2000

posted 09-04-2001 11:13 PM     Click Here to See the Profile for 70coupe     Edit/Delete Message   Reply w/Quote
Best 60' 1.82, most of the time 1.83-1.84

IP: Logged

clevelandstyle
Gearhead

Posts: 614
From: Connersville, IN
Registered: Jul 2001

posted 09-04-2001 11:17 PM     Click Here to See the Profile for clevelandstyle     Edit/Delete Message   Reply w/Quote
Feels Cool doesn't it? It won't be long and you get some 1.70s. Let us know.

You've made some huge improvements lately, Dude.

IP: Logged

Mike_R
Gearhead

Posts: 150
From: Indianapolis, IN 46237
Registered: Feb 2001

posted 09-05-2001 08:35 AM     Click Here to See the Profile for Mike_R   Click Here to Email Mike_R     Edit/Delete Message   Reply w/Quote
Congratulations. It's great when all the hard work pays off. Satisfaction is often few and far between so try and enjoy it. If you're like me you'll wake up in about a week and start making plans to run 11's.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2003, Steve LaRiviere. All Rights Reserved.


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Build a free Mustangsandmore.ws Home Page!]

[About M&M][Acronyms][Calendar][Chat][Classifieds] [Links] [Members' Pics] [M&M Mug Shots] [Tech] [ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]