|
Author
|
Topic: Tach Installation
|
Velocity0
Gearhead Posts: 273
From: Burnaby, BC Canada
Registered: Apr 2001
|
posted 07-30-2001 01:43 AM
   
Hey..
My friend wants me to install a tach on his truck.I need a little clarification...
On the back is 3 leads right? Where do they all go again?
------------------
Tyler
1980 Mustang HB
2.3L Baby Stang
Soon to be 302
IP: Logged |
capri man
Gearhead Posts: 1267
From: doerun, ga.
Registered: Nov 2000
|
posted 07-30-2001 10:03 AM
hi tyler, probably the red to a hot wire controlled by the ign. switch. black to ground. green to coil. if you have a white one, it is probably the light and can be hooked to the red one. notice i said probably.
good luck------------------
mike r
racing is real
everything else is just a game.
81 capri-7.56 @88mph 1/8
1.56 60 ft. [This message has been edited by capri man (edited 07-30-2001).]
IP: Logged |
Velocity0
Gearhead Posts: 273
From: Burnaby, BC Canada
Registered: Apr 2001
|
posted 07-30-2001 10:17 PM
What side of the tach?------------------
Tyler
1980 Mustang HB
2.3L Baby Stang
Soon to be 302
IP: Logged |
steve'66
Gearhead Posts: 3653
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-30-2001 11:11 PM
Tyler do you mean which side of the coil does the green wire go on? If so, the negative (-) side.Steve
IP: Logged |
Velocity0
Gearhead Posts: 273
From: Burnaby, BC Canada
Registered: Apr 2001
|
posted 07-30-2001 11:18 PM
Yeah...Thats what I meant.
I got my mind crossed.
------------------
Tyler
1980 Mustang HB
2.3L Baby Stang
Soon to be 302
IP: Logged |
steve'66
Gearhead Posts: 3653
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-30-2001 11:20 PM
 Good luck, but remember we're only guessing. But it is a SWAG, scientific wild *** guess.  SteveW
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
