351c with roller cam - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

351c with roller cam

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: 351c with roller cam
70coupe Gearhead Posts: 459 From: Toronto,Ontario,Canada Registered: Aug 2000	posted 07-23-2001 07:54 PM Do you need to do any mods to the cleveland in order to run a roller cam? Other than a bronze distributor gear and a different thrust bearing? Might try one. IP: Logged
kid vishus Gearhead Posts: 6098 From: middle of NC Registered: Oct 2000	posted 07-23-2001 08:49 PM My suggestion, double pin the cam. Twice now, I have sheared the pin off in the front of the cam and bent alot of parts. IP: Logged
SteveLaRiviere Administrator Posts: 43151 From: Saco, Maine Registered: May 99	posted 07-24-2001 02:03 PM If you run a mechanical roller, no. A hydraulic roller needs a couple of holes drilled and tapped for the lifter retainer. {spyder} ------------------ '70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open '72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip '97 Probe GTS 2.5L DOHC Ford. The closer you look, the better WE look! IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]