|
Author
|
Topic: Plasma Cutter tips?
|
ekbeanctr
Gearhead Posts: 739
From: Middlebury, IN USA
Registered: Dec 2000
|
posted 10-01-2005 08:37 PM
   
Well I won the bidding for a plasma cutter so now does anybody have tips on how to use it?------------------
Red Fire Clearcoat 65 Fastback, 408W. AFR Heads, Hooker SuperComp Headers, 292H Cam. 750 Holley, 4 Speed, 9" Posi Rear End
[email protected]
http://www.cardomain.com/memberpage/801279/1
IP: Logged |
senzstang
Gearhead Posts: 335
From: perry, oh, usa
Registered: May 2002
|
posted 10-03-2005 04:34 PM
Make sure your compressed air supply is DRY DRY DRY. Moisture will cause rapid consumption of tips.Read the owners manual for the rest. They are really straight forward and fun to boot! Phil
IP: Logged |
427Fastback
Gearhead Posts: 383
From: N.Vancouver.B.C
Registered: Jan 2005
|
posted 10-03-2005 04:54 PM
I second that...dry,dry air..Contrary to what you see the yahoo's on Discovery channel do.Wear Goggles/tinted shield or your helmut turned down to around 5,and wear some sort of gloves.. Make sure there is nothing you value under or behind what you are cutting..A thin piece of alluminum makes a good shield... Cory ------------------
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
IP: Logged |
Mustangsandmore Forums
