|
Author
|
Topic: not sure on part names
|
droogys68
Journeyman Posts: 7
From: kit.,ontario,canada
Registered: Jun 2001
|
posted 02-07-2002 06:13 PM
   
i'm about to start getting parts to do my cowl, which is just shot. any sign of rain and i have niagara falls at my feet.also leaking through the wipers.i want to get all the parts hopefully before i send the baby out, so we're not apart for too long.ANY info. on where i could find the proper name(s) of the sheet metal required would only put you into a GODlike category.
IP: Logged |
SteveLaRiviere
Administrator Posts: 20027
From: Saco, Maine USA
Registered: May 99
|
posted 02-07-2002 06:34 PM
Do you have a National Parts Depot catalog? They an excellent amount of exploded parts drawings to help you order the parts you need.Another excellent source are the Osborn assembly manuals. In addition to telling you what the parts are called, they also show you every detail, such as how many spot welds there are and where to put them. Can you post a pic? We could help you ID what you need that way, too. ------------------
'70 Mustang Mach 1 M code 351C 4V/FMX/3.25 open
'72 Mustang Sprint Coupe 351C 4V/FMX/4.30 Trac Lok
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
'97 Probe GTS 2.5L DOHC
MCA Member # 47773
Speak softly, but carry a BFH!
IP: Logged |
Mike65
Gearhead Posts: 1239
From: Columbia,NJ, USA. 65 Fastback, 69 Coupe MCA #-04549
Registered: Dec 2000
|
posted 02-08-2002 12:01 AM
They are called the inner cowl vent repair panels.  Thank you just call me GOD LOL------------------
Mike & Robin
65 Mustang Fastback
69 Mustang Coupe
87 LTD CV
96 Ranger Extd Cab PU
99 Explorer Sport
M&M #- 890
MCA #- 4549
www.mike65.mustangsandmore.ws
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
