|
Author
|
Topic: mufflers,wheels,valve covers
|
fastford34
Gearhead Posts: 1036
From: penna
Registered: May 2002
|
posted 11-28-2005 05:20 PM
   
2 THRUSH mufflers, 2 1/2 inlet/outlet, 14 x 10 x 4 1/2............$20.00 + S&H2 slotted aluminum wheels, 14 x 7 unilug, 3 1/4 back space. the wheels need a GOOD cleaning/polishing. some dings/scratches ...$70.00 + S&H 2 slotted alum wheels, 15 x 6 unilug, 3" backspace. i had them sand/bead blasted. 1 wheel looks ok, the other shows a lot of pitting....$50.00 + S&H pair of 351 "C" Cal-custom type valve covers. i had these cleaned & painted (new place in the area,i showed them & was told they could make em look like new)...they do not look like new & don't suit me...$50.00 + S&H pair of FORD MOTORSPORTS aluminum valve covers for 351 C. need cleaning/polishing...$50.00 + S&H pair of factory "C" valve covers, bent/dented etc. i was going to cut them & bend the top up to catch the oil while adjusting the valves.....$5.00 + S&H parts are located in Reading,Pa 19606
i have some pics if wanted. thanks ------------------
34 coupe powered by 351 c 4v
keith
it`s nice to be important but more IMPORTANT to be nice. [This message has been edited by fastford34 (edited 11-28-2005).] [This message has been edited by fastford34 (edited 11-29-2005).]
IP: Logged |
Okiehog
Gearhead Posts: 174
From: Ardmore, ok
Registered: May 2000
|
posted 11-29-2005 06:49 AM
quote:
Originally posted by fastford34:
2 THRUSH mufflers, 2 1/2 inlet/outlet, 14 x 10 x 4 1/2............$20.00 + S&H2 slotted aluminum wheels, 14 x 7 unilug, 3 1/4 back space. the wheels need a GOOD cleaning/polishing. some dings/scratches ...$70.00 + S&H 2 slotted alum wheels, 15 x 6 unilug, 3" backspace. i had them sand/bead blasted. 1 wheel looks ok, the other shows a lot of pitting....$50.00 + S&H pair of 351 "C" Cal-custom type valve covers. i had these cleaned & painted (new place in the area,i showed them & was told they could make em look like new)...they do not look like new & don't suit me...$50.00 + S&H pair of FORD MOTORSPORTS aluminum valve covers. need cleaning/polishing...$50.00 + S&H pair of factory "C" valve covers, bent/dented etc. i was going to cut them & bend the top up to catch the oil while adjusting the valves.....$5.00 + S&H parts are located in Reading,Pa 19606
i have some pics if wanted. thanks
Are the motorsports V-Covers for a Cleveland? If so, send me some pics,
[email protected] ------------------
Ebay rating + 250, no negatives.
68 GT, 4spd, 427 side-oiler
69 CJ, Mach 1--Need a Motor!
90 GT, AOD--For Sale
94 Cobra, Rio Red, Black cloth, 46K, Nice!!
IP: Logged |
68 S-code GT
Gearhead Posts: 3011
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 11-29-2005 08:59 AM
quote:
Originally posted by fastford34:
pair of FORD MOTORSPORTS aluminum valve covers. need cleaning/polishing...$50.00 + S&H
I might be interested in these also can you send me a picture along with what engine they are for? ------------------
Ed S. 68 S-code FB GT 4spd(now C6)/3.25 PS PDB
68 J-code(now 289) Cp Sprint"B" C4/3L00-9" PDB PS AC Bla-Bla-Bla
99 F150 XLT Ext/cab, 4X4, 5.4L, 3L55
IP: Logged |
fastford34
Gearhead Posts: 1036
From: penna
Registered: May 2002
|
posted 11-29-2005 04:23 PM
Sorry about that. the motorsports covers are for a cleveland.
i tried to send pics to both of you, it didn't work.it times out & disconnects before completing the task!
maybe if you e-mail me first, i can reply with pics?------------------
34 coupe powered by 351 c 4v
keith
it`s nice to be important but more IMPORTANT to be nice.
IP: Logged | |
Mustangsandmore Forums
