Brought to you in part by:

Great deals on auto restoration supplies!

.


  Mustangsandmore Forums
  Classified Ads -- No Commercial Ads Permitted
  68 Mustang Parts... Again

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   68 Mustang Parts... Again
Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-04-2005 09:08 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
1969 Coupe/Conv Deck lid .. almost no rust! Great condition! $50

1967/8 Coupe/Conv Deck Lid $35

Drivetrain off a auto C4 to a 2.79 Rear good condition! Light rust, mostly dirt. Includes yoke. $20

2" Dual Exhaust. Never used. For 302 on 71-73 Mustangs. Comes with H-Pipe and mufflers. $150? make offer

Exhaust Hangers for a 2 1/2" Exhaust. Brand New. $25

Metal part of the dash for a 71-73. Good condition, light surface rust underneath. $10

Original Autolite Distributer $20
Small Grille corral for 68 Mustangs $5
Stone Deflector Brackets $5
Original 68 door handles $2
Fastback door trim for 71-73 $5
Original Oil pan for a 302 $10
4 Steel Rims $20
Original 302 water pump pulley SOLD
Original 302 crankshaft pulley (AC & PS) SOLD
1971-73 Drivers side door glass $25
1971-73 Windshield glass $50
1971-73 Fastback Glass $45
Fat Grille Trim for 68 $5
Original Valve Covers 289/302/351 paint on them $5
A/C Assembly off 68 302 $40
Original Air Cleaner (came on 289) - Complete $10
Brand new bag of 6 shock tower brace bolts $3
MSD coil and bracket(original)for 302/289 etc.. $5

Rebuilt 289 Heads - have 30K on them, run great! Come with 32 push rods, rocker arms, and everything needed. $20

3 General Mud Grabber MT tires and 1 Dunlop Mud Rover tire - all 35 inches by 12.5. Good tread, like new! $250

------------------
David
68 Coupe
302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

68 S-code GT
Gearhead

Posts: 3063
From: Sayreville, NJ, US
Registered: Mar 2000

posted 10-04-2005 10:34 PM     Click Here to See the Profile for 68 S-code GT   Click Here to Email 68 S-code GT     Edit/Delete Message   Reply w/Quote
Can you send me a picture of the AC parts you have for sale and are the 2.5? hangers from a certain exhaust system?

------------------
Ed S.

68 S-code FB GT 4spd(now C6)/3.25 PS PDB
68 J-code(now 289) Cp Sprint"B" C4/3L00-9" PDB PS AC Bla-Bla-Bla
99 F150 XLT Ext/cab, 4X4, 5.4L, 3L55

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 10-04-2005 11:35 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
I will email you about the heads. Please keep a eye out for it.

Thanks.

Richard.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

IP: Logged

BEAR12686
Journeyman

Posts: 22
From: NEW YORK
Registered: Oct 2005

posted 10-05-2005 07:24 AM     Click Here to See the Profile for BEAR12686   Click Here to Email BEAR12686     Edit/Delete Message   Reply w/Quote
IM LOOKING FOR A REAR END 5 LUG FOR A 1968 MUSTANG AND FRONT DRUM BRAKE ASSEMBLY 5 LUG WITH SPINDLES DO YOU HAVE THANKS SAL

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-05-2005 07:57 AM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
Will get those AC pics out as soon as I can, The hangers are for a dual exhaust. I was going to use them on my 71 Mach 1 but then I junked it. Im sorry I dont have a rear or spindles for sale right now.

------------------
David
68 Coupe
302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

HHStang
Gearhead

Posts: 539
From: Coastal SC, USA
Registered: Feb 2003

posted 10-06-2005 09:02 PM     Click Here to See the Profile for HHStang   Click Here to Email HHStang     Edit/Delete Message   Reply w/Quote
what 71-73 2" exhaust pieces do you have, who made them and can you email me pics to [email protected]?

------------------
------------------------
1967 472 PS headed to PT D1X FBstang
1972 429 Mach/CJ Vert Clone
2004 F150 4x4 Crew FX4


Hobby site: www.mikesmustangs.net

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-07-2005 02:23 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I have all the pieces for the exhaust including an H-Pipe. I bought them through Mustangs Unlimited. I will send pics.

------------------
David
68 Coupe
302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 10-07-2005 05:54 PM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
How much would it cost to ship the valve covers to zip code 39443?

IP: Logged

68 S-code GT
Gearhead

Posts: 3063
From: Sayreville, NJ, US
Registered: Mar 2000

posted 10-08-2005 08:28 AM     Click Here to See the Profile for 68 S-code GT   Click Here to Email 68 S-code GT     Edit/Delete Message   Reply w/Quote
So the hangers are made for the dual exhaust kit you have?

IP: Logged

bob6364
Gearhead

Posts: 286
From: griswold,ct usa MCA#59447
Registered: Dec 2004

posted 10-08-2005 09:34 AM     Click Here to See the Profile for bob6364   Click Here to Email bob6364     Edit/Delete Message   Reply w/Quote
I have that very same dual exhaust on my sons 71 coupe and it sounds good.It has a factory dual sound.

IP: Logged

Hemikiller
Gearhead

Posts: 664
From: Killingworth, CT
Registered: Feb 2002

posted 10-08-2005 11:44 AM     Click Here to See the Profile for Hemikiller   Click Here to Email Hemikiller     Edit/Delete Message   Reply w/Quote
How much for the 71 fastback glass shipped to CT, 06413?

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-08-2005 11:14 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
mikulh - It will cost about $9.00 to ship.
68 S-code GT - The exhaust is a 2 inch and the hangers are for a 2.5.
Hemikiller - I would prefer pickup on large glass items.

------------------
David
68 Coupe
302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

68 S-code GT
Gearhead

Posts: 3063
From: Sayreville, NJ, US
Registered: Mar 2000

posted 10-09-2005 04:34 PM     Click Here to See the Profile for 68 S-code GT   Click Here to Email 68 S-code GT     Edit/Delete Message   Reply w/Quote
So the hangers and the exhaust are a match for the 71 then? Also. What have you decided about the expansion valve?

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-09-2005 06:12 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I havent taken the pictures of the valve yet because I cannot find my digital camera! I will borrow my neighbors and get them to you tonight. The hangers are too big for the exhaust, they dont fit.

------------------
David
68 Coupe
302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 10-10-2005 01:42 PM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
I'll take the valve covers. I sent you an email.

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-11-2005 11:26 AM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I havent recieved any emails. Are you sure you sent it to the right address?

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 10-11-2005 02:35 PM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
I sent it here.... [email protected]
Anyway... I fixed my profile so that it should allow you to see my email address now. If you don't mind, send me an email.

IP: Logged

HHStang
Gearhead

Posts: 539
From: Coastal SC, USA
Registered: Feb 2003

posted 10-15-2005 09:06 PM     Click Here to See the Profile for HHStang   Click Here to Email HHStang     Edit/Delete Message   Reply w/Quote
still interested in exhaust pics if you have this to sell at [email protected] Also, do you have aluminum dash or front fender extension/headlight buckets for 67? E-mail me please.

------------------
------------------------
1967 472 PS headed to PT D1X FBstang
1972 429 Mach/CJ Vert Clone
2004 F150 4x4 Crew FX4


Hobby site: www.mikesmustangs.net

[This message has been edited by HHStang (edited 10-15-2005).]

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 10-16-2005 12:29 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
HHStang - Im sorry I dont have any fender extensions at this time. I sent you an email with pics from the exhaust.

mikulh - I sent you two emails, did you recieve them? If your still interested, I shave the valve covers still for sale.

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 10-17-2005 11:41 AM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
I didn't get your emails. Please note that there are two underscores ('_') between my first and last name in my email address, not just one. I will be out of town the rest of this week. I'm still interested in the valve covers and I'll check back next Monday (10/24/05).

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 10-27-2005 09:47 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
quote:

Original Autolite Distributer $20
Original Oil pan for a 302 $10
Original Air Cleaner (came on 289) - Complete $10
MSD coil and bracket(original)for 302/289 etc.. $5
[/B]

Do you still have these parts?

If so can you please email pics to me and please let me know what you would take for all of it? I may only need one or two parts but just incase.

Also the Dist, does it have points or is it electric?

Thanks
Richard.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 11-04-2005 11:24 AM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
Did you recieve my check? I sent it over a week ago. I'm not trying to rush you or anything, but it'd be nice to at least know if you got the check or not and if you did when you plan to ship the valve covers.

thanks,
Michael

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-04-2005 01:14 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I check my mail everyday and havent recieved anything like that. I will keep a lookout and hopefully it will come soon.

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-04-2005 04:28 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
David,

Just wanted to know if you still had those parts I asked about. I never heard back from you.

Richard.


Original Autolite Distributer $20
Original Oil pan for a 302 $10
Original Air Cleaner (came on 289) - Complete $10
MSD coil and bracket(original)for 302/289 etc.. $5
[/B]
--------------------------------------------------------------------------------

Do you still have these parts?

If so can you please email pics to me and please let me know what you would take for all of it? I may only need one or two parts but just incase.

Also the Dist, does it have points or is it electric?

Thanks
Richard.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-05-2005 12:17 AM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I do still have the parts. I sent you an email with pictures. Is your email [email protected]?

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-05-2005 01:39 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
yep it sure is. I just checked my email and I don't have anything from you.

I will send you a email and you can reply to it if you like. I am very interested. Does the dist have points or is it elect?

Richard.

email on the way.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-05-2005 02:39 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
got your email. I have replyed.

:-)

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

IP: Logged

RogueS
Journeyman

Posts: 77
From: Wichita, KS, USA
Registered: Oct 2004

posted 11-05-2005 05:02 PM     Click Here to See the Profile for RogueS   Click Here to Email RogueS     Edit/Delete Message   Reply w/Quote
What size are the steel rims?

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-06-2005 10:53 AM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
The steel rims are 15".

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

RogueS
Journeyman

Posts: 77
From: Wichita, KS, USA
Registered: Oct 2004

posted 11-06-2005 12:14 PM     Click Here to See the Profile for RogueS   Click Here to Email RogueS     Edit/Delete Message   Reply w/Quote
Any idea on the width or are they the 15x8 ones on your website? If so, what is the backspacing on them?

[This message has been edited by RogueS (edited 11-06-2005).]

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-06-2005 03:13 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
Thanks very much for the email and the pics. If they are still available I will take the oil pan and the air cleaner.

What would you like for the two items with shipping to 45102?
Richard.

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-08-2005 09:31 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
just wanted to check and see if you still have those parts. I will take them if you do. Just let me know.

Thanks.
Richard.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

SOON TO HAVE A NEWER '95 HO

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-10-2005 01:49 AM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
Michael, I recieved your check yesterday, Monday, and shipped them on Monday. Enjoy!

Richard, those parts are still for sale, but I emailed you about the oil pan.

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-10-2005 08:05 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
Great.

I looked for the email but I do not see it. Did you send it to [email protected]?

I will double check it again when I get home.

You can also send it to [email protected] which is my work email.

Thanks.
Richard.

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 11-10-2005 04:28 PM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
Sweet! ... I was starting to think it got lost in the mail. Thanks for letting me know, I was really starting to wonder.

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-10-2005 07:34 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
sorry. I did not get the email. I sent you one though.

Richard.

IP: Logged

mikulh
Journeyman

Posts: 9
From:
Registered: Aug 2005

posted 11-15-2005 06:07 PM     Click Here to See the Profile for mikulh   Click Here to Email mikulh     Edit/Delete Message   Reply w/Quote
Fight2Conquer,
Got the valve covers. Thanks!
I noticed shipping on the valve covers was like $9.50 whereas in your email you anticipated it to be like $6.00. If you want I can send you a check to make up the difference. I definitely wasn't trying to short change you.

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-15-2005 06:39 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
No, its no problem. Glad you like them!

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-16-2005 12:18 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
David,

did you get my last email?

Richard.

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 11-16-2005 12:11 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
I have recieved all your emails. Im just trying to find a box to fit everything in...

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-17-2005 06:29 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
Cool. Thanks.

Richard.

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 11-23-2005 05:38 PM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
Did you get a chance to find a box yet?

Richard.

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 12-03-2005 11:24 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
I really need a oil pan. If you can help that is great. If I don't hear from you soon I will go to summit.

Thanks.

Richard.

------------------
rmousir
'66 Mustang
Ford Blue & white stripes
302 auto
Mustang ~ 04-05

SOON TO HAVE A NEWER '95 HO

IP: Logged

Fight2Conquer
Gearhead

Posts: 116
From: Vernon, NJ
Registered: Sep 2004

posted 12-05-2005 06:37 PM     Click Here to See the Profile for Fight2Conquer   Click Here to Email Fight2Conquer     Edit/Delete Message   Reply w/Quote
Sorry Richard. Ive been going through some tough times. Ive got your box and your things ready to go. I dont know if you want me to clean the oil pan off for you? It has a little bit of dirt, actually layers of dirt and grime. Ill email you tonight.

------------------
David
68 Coupe 302
Currently has:
Edelbrock Performer Intake
Miloden Water Pump
Holley Hi-Po Fuel Pump
Rebuilt 302 Heads
Hooker Comp Headers
March Pulley System

Work in Progress

www.partsandcars.8m.com
I have pics of the restoration and all the extra parts I have

IP: Logged

rmousir
Gearhead

Posts: 544
From: Amelia, Ohio
Registered: May 2003

posted 12-16-2005 09:43 AM     Click Here to See the Profile for rmousir   Click Here to Email rmousir     Edit/Delete Message   Reply w/Quote
David,

You have mail.

Thanks.

Richard.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Build a free Mustangsandmore.ws Home Page!]

[Posting Pictures]

[About M&M][Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[M&M Conventions] [M&M Mug Shots]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]