Brought to you in part by:

.

JC Whitney clearance center!
  Mustangsandmore Forums
  Classified Ads -- No Commercial Ads Permitted
  For Sale: 7.700" Comp Cams Hi Tech pushrods

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   For Sale: 7.700" Comp Cams Hi Tech pushrods
f100cleveland
Gearhead

Posts: 297
From: St. James, MN
Registered: Sep 2004

posted 04-10-2005 04:07 PM     Click Here to See the Profile for f100cleveland   Click Here to Email f100cleveland     Edit/Delete Message   Reply w/Quote
I changed rocker arms in my 351c and also the cam had been changed and it had a slightly different base circle too so I needed a different length pushrod. These pushrods are the Comp Cams Hi Tech pushrods that are 3/8" with 5/16" ends. They have an 0.080" wall thickness. If you need them, let me know. I'd like to get 50 bucks for them. They only have about 3500 miles on them.

------------------
1982 Ford F100 2wd Shortbox. Powered by a 357 Cleveland w/ closed chamber 4v's and a Funnelweb. Full Roller c-6 trans with Gear Vendors Overdrive and 4.86 geared Detroit Locker equipped 9" rear.

1982 F100 351c 4v

1977 F150 460 Burnout Truck

IP: Logged

kid vishus
Gearhead

Posts: 6111
From: middle of NC
Registered: Oct 2000

posted 04-10-2005 06:55 PM     Click Here to See the Profile for kid vishus   Click Here to Email kid vishus     Edit/Delete Message   Reply w/Quote
I'm just curious, were those for a retro fit hydro roller?

The reason I ask is a stock 351C pushrod is somewhere around 8.4" long.

IP: Logged

f100cleveland
Gearhead

Posts: 297
From: St. James, MN
Registered: Sep 2004

posted 04-10-2005 11:06 PM     Click Here to See the Profile for f100cleveland   Click Here to Email f100cleveland     Edit/Delete Message   Reply w/Quote
Hey Kid,
You are correct. They were perfect with the Comp 304HR cam and the Crane Gold Race rockers. After I went with the MME hyd roller and the Crower Stainless rockers, it changed that much. That 7.700" is actually what they list for 351w with a roller cam too.

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]